1B Flashcards
Those that have the capability to operate on multiple frequency bands to include military and commercial satellites, most notably on C, X, Ku or Ka-bands.
Multiband Satellite Terminals
What does GMT stand for?
Ground Multiband Terminal
The GMT is also known as?
AN/TSC-179
The GMT Dual Hub, Quad-Band Terminal able to operate in which bands?
C, X, Ku, or Ka Bands
The GMT is capable of ___ uplink and ___ downlinks per hub.
one
six
Since the GMT is a dual hub system, it is capable of ___ uplinks and ___ downlinks.
two
twelve
The second hub requires an additional ___ since the GMT ships with only one ___.
antenna
___ are identical and interchangeable for quick troubleshooting.
Hub 1 and 2
The GMT is capable of communicating with military and commercial constellation and…?
legacy GMF termiinals
While the GMT is a highly versatile SATCOM terminal, it does maintain a large footprint taking up two ___ pallets which can make its deployment capabilities specific.
463L
There are ___ transit cases: 19 antenna cases, 6 electronics cases, 2 PDP cases and 2 spare equipment cases.
29
There are 29 transit cases: ___ antenna cases, 6 electronics cases, 2 PDP cases and 2 spare equipment cases.
19
There are 29 transit cases: 19 antenna cases, ___ electronics cases, 2 PDP cases and 2 spare equipment cases.
6
There are 29 transit cases: 19 antenna cases, 6 electronics cases, ___ PDP cases and 2 spare equipment cases.
2
There are 29 transit cases: 19 antenna cases, 6 electronics cases, 2 PDP cases and ___ spare equipment cases.
2
The GMT requires ___ qualified personnel to setup and tear down
two
The GMT is compatible with the following antennas:
- The factory provided Small Aperture Antenna (SAA)
- The OE-361 Quick Reaction Satellite Antenna (QRSA)
- The Lightweight High Gain X-band Antenna (LHGXA)
- The Large Aperture Multiband Deployable Antenna (LAMDA)
- The Quad-band Large Aperture Antenna (QLAA)
It goes without saying that without adequate ___ to your terminal no communications happen, which is why ___ distribution is one of the most important aspects of all communications equipment.
power
Stemming from the generator would be a ___ ___ ___ that would
be dedicated for a suite of equipment.
Power Distribution Panel (PDP)
PDPs are designed for use with ___ amp, five-wire power cable (part No. 60- A-5c-L3-2) or equivalent government inventory.
60
The local PDP has to be within __ft of local power source, be it commercial or generator.
50
The remote PDPs can be separated from the local PDP up to ___ feet with acceptable voltage drop by daisy chaining five of the 50-foot segments of 60-amp cable.
250
In the event that power is interrupted, some systems might be equipped with an ___ ___ ___ dedicated to preserving power in the event of facility or generator failure.
Uninterruptible Power Supply (UPS)
UPS typically sit between the ___ and the ___ and can provide back-up power for a limited amount of time, although an increased power consumption can decrease total time.
communications equipment
main power source
