13-1-6.2 Flashcards
Parachute parts and restraint harness shall be machine eased fo no longer than how long and not to exceed what temperature?
10 minutes
60 c 140F
On Gore 28 below the nameplate information marking shall be what size and color ?
1/2 inch and Blue Ink
Remove the parachute assembly from service if the following things happen?
- ) immersion in saltwater for more than 24hrs or immersion in saltwater and cannot be cleaned within 36hrs
- ) contamination by a firefighting agent
What is the safe zone PH reading for parachute parts or restraint harness?
5.0 to 9.0
What is the torque value on a connector link ?
20-25 in lbs
Ideals conditions for a paraloft are ?
24 c(75F)
60% relative humidity
Storage facilities
Shall be well-ventilated and free of dust and other contaminants such oils, acid and cleaning fluids.
(50to95F)
(25 to 80% relative humidity)
The humidity and temperature of a paraloft should recorded how many times a day ?
3 times a day
Paraloft lighting
Avoid exposure of parachutes to sun light , also avoid prolonged exposure over inspection lights.parachutes should not be exposed to fluorescent lights closer than 5ft. Exposure to excessive lighting degrades nylon material.
Packing tables
45ft by 36-in by 36-in
When a repair is performed on parachute assembly or a subassembly what is the next step?
Notation shall be made on the local use block or Auto log set.
Who is the in service support center for parachute assemblies?
Naval Air warfare center Division, China Lake, CA
What is the torque value on the shoulder screws on a Lap belt adapter assembly?
15 in-lbs +/- 1 in-lb
