11B Division 3 Building Blocks Flashcards

1
Q

11B-302 Floor or Ground Surfaces: GENERAL - Floor and ground surfaces shall be stable, firm, and slip resistant, except at?

A

animal containment areas and Areas of sport activity

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

11B-302 Floor or Ground Surfaces: CARPETING - What are the requirements for carpeting?

A

Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad; shall have a level loop, textured loop, level cut pile, or level cut/uncut pile texture. Pile height shall be 1⁄2 inch maximum. Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

11B-302 Floor or Ground Surfaces: OPENINGS - Openings in floor or ground surfaces shall not allow?

A

passage of a sphere more than 1⁄2 inch diameter. Elongated openings shall be placed so that the long dimension is perpendicular to the dominant direction of travel.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

11B-303 Changes in Level: What areas are exempt from the requirements of this section?

A

Animal containment areas and areas of sport activity.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

11B-303 Changes in Level: What is the maximum height of vertical changes in elevation?

A

1/4”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

11B-303 Changes in Level: Changes in level between 1⁄4” high minimum and 1⁄2” high maximum shall be?

A

beveled with a slope not steeper than 1:2.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

11B-303 Changes in Level: RAMPS - Changes in level greater than ____ in height shall be ramped

A

1/2 inch

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

11B-303 Changes in Level: WARNING CURBS - Abrupt changes in level exceeding 4 inches in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be?

A

identified by warning curbs at least 6 inches in height above the walk or sidewalk surface.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

11B-303 Changes in Level: WARNING CURBS - Abrupt changes in level exceeding 4 inches in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches in height above the walk or sidewalk surface, except at which locations?

A
  1. between a walk or sidewalk and an adjacent street or driveway. 2. when a guard or handrail is provided with a guide rail centered 2 inches minimum and 4 inches maximum above the surface of the walk or sidewalk.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

11B-304 Turning Space: FLOOR OR GROUND SURFACE - Changes in level within the turning space shall?

A

not be permitted.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

11B-304 Turning Space: What is the maximum slope permitted in a turning space?

A

Slopes not steeper than 1:48 shall be permitted.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

11B-304 Turning Space: CIRCULAR - what is the minimum diameter of a turning space?

A

60 inches diameter minimum

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

11B-304 Turning Space: CIRCULAR - the space shall be permitted to include?

A

knee and toe clearance complying with 11B- 306 (Knee and Toe Clearance).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

11B-304 Turning Space: T-SHAPED SPACE - what are the minimum dimensions of a T-shaped turning space?

A

60 inch square minimum with arms and base 36 inches wide minimum. Each arm of the T shall be clear of obstructions 12 inches minimum in each direction and the base shall be clear of obstructions 24 inches minimum.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

11B-304 Turning Space: DOOR SWING - Are doors shall permitted to swing into turning spaces?

A

Yes. Doors shall be permitted to swing into turning spaces.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

11B-305 Clear Floor or Ground Space: What is the maximum slope permitted in a clear floor or ground space?

A

Slopes not steeper than 1:48 shall be permitted.

17
Q

11B-305 Clear Floor or Ground Space: changes in level within a clear floor or ground space shall?

A

not be permitted.

18
Q

11B-305 Clear Floor or Ground Space: SIZE - The size of the clear floor or ground space shall be?

A

30 inches minimum by 48 inches minimum.

19
Q

11B-305 Clear Floor or Ground Space: KNEE AND TOE CLEARANCE - is the clear floor or ground space permitted to include knee and toe clearance?

A

yes, unless otherwise specified.

20
Q

11B-305 Clear Floor or Ground Space: POSITION - Unless otherwise specified, clear floor or ground space shall be positioned for what type of approach?

A

either forward or parallel approach to an element.

21
Q

11B-305 Clear Floor or Ground Space: APPROACH - One full unobstructed side of the clear floor or ground space shall adjoin?

A

an accessible route or adjoin another clear floor or ground space.

22
Q

11B-305 Clear Floor or Ground Space: APPROACH - Clear floor or ground space may overlap an accessible route, except when _____

A

specifically prohibited elsewhere in chapter 11B.

23
Q

11B-305 Clear Floor or Ground Space: MANEUVERING CLEARANCE - additional maneuvering clearance shall be provided where _______

A

a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides

24
Q

11B-305 Clear Floor or Ground Space: FORWARD APPROACH -What is the width of an alcove when the depth exceeds 24 inches?

A

Alcoves shall be 36 inches wide minimum where the depth exceeds 24 inches.

25
11B-305 Clear Floor or Ground Space: PARALLEL APPROACH - What is the width of an alcove when the depth exceeds 15 inches?
Alcoves shall be 60 inches wide minimum where the depth exceeds 15 inches.
26
11B-306 Knee and Toe Clearance: GENERAL - Space under an element between the finish floor or ground and ___ inches above the finish floor or ground shall be considered toe clearance
9 inches.
27
11B-306 Knee and Toe Clearance: MAXIMUM DEPTH - Toe clearance shall extend ___ inches maximum under an element.
25 inches maximum.
28
11B-306 Knee and Toe Clearance: MAXIMUM DEPTH - Toe clearance shall extend 25 inches maximum under an element except that the depth is reduced to ___ inches maximum at \_\_\_\_\_.
Toe clearance shall extend 19 inches maximum under lavatories required to be accessible.
29
11B-306 Knee and Toe Clearance: MINIMUM REQUIRED DEPTH - Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend ___ inches minimum under the element.
toe clearance shall extend 17 inches minimum under the element.
30
11B-306 Knee and Toe Clearance: MINIMUM REQUIRED DEPTH - The toe clearance shall extend ___ inches minimum under sinks required to be accessible
The toe clearance shall extend 19 inches minimum under sinks required to be accessible.
31
11B-306 Knee and Toe Clearance: MINIMUM REQUIRED DEPTH - The toe clearance shall extend ___ inches minimum under built-in dining and work surfaces required to be accessible
The toe clearance shall extend 19 inches minimum under built-in dining and work surfaces required to be accessible