(1) Vol 3 SCBA Flashcards
The backpack is designed to transfer ___% of the load to hips
60
The backpack harness and cylinder weight approximately ____ lbs.
30.25
The air cylinder has a maximum working pressure of _____ psi
4,500
When full, the 45 min air cylinder contains ____ cubic feet of air
65.6
When full, the 60 min air cylinder contains ____ cubic feet of air
87
The air cylinders time rating is classified at a user rate of ___ liters per minute.
40 liters
The air cylinder is hydrostatically tested every ___ years
5
The department designator for newer bottles is “LFD” imprinted on the ___ inch luminescent band.
2”
The first stage regulator lowers cylinder air pressure to a nominal ___ psi
115
The low pressure SCBA audible alarm activates at ____ to ____ psi.
1035-1215 psi (25% left in air bottle)
Once the low pressure SCBA audible alarm activates, the audible alarm will continue to sound UNTIL the air pressure drops below ___ psi
200
When the pressure drops below 50% of cylinder capacity, the HUD LED representing 1/2 cylinder capacity starts to flash, and continues to flash for a short time (approximately __ seconds) before returning to continuously lit.
20 sec
When pressure drops to ____%, the ___ on the HUD will turn RED and begin to flash between 1035 and 1215 psi.
25%
1/4 LED
When the pressure drops to ___% of cylinder capacity, the red 1/4 HUD LED begins to flash noticeably faster and continues flashing in this manner until air pressure drops below approximately ___ psi,at which time the display will turn off
- 10%
- 200 psi
There are how many battery status indicators amber LEDs on the SCBA?
3
HUD
Backpack harness
PASS device
The amber LED on the Backpack and PASS device will flash once every ___ seconds to indicate a USABLE battery condition
10
The amber LED on the Backpack and PASS device flashes every ___ seconds to indicate a LOW battery condition
2
Turning the bypass knob on the second stage regulator _______ (clockwise or counterclockwise?) will provide a constant air flow.
Counterclockwise