Written Exam Flashcards
What form is a Strike Report?
AF IMT 4304
What form is a Drop Zone Survey?
AF IMT 3823
What is the Air Forces list of all approved and available drop zones?
Zone Availability Report (ZAR)
How far from the DZ do you need to identify obstacles on the Drop Zone Survey?
1000m
How long is a Tactical Assessment valid?
When the mission is complete, up to 24 hours
Who is the approval authority for a Tactical Assessment?
First O-6 in the unit
Who verifies the Drop Zone Survey?
Signed by the first O-6 in the supported unit
Who verifies the Drop Zone Survey?
Signed by the first O-6 in the supported unit
What does SKE stand for?
Station Keeping Equipment
What is the acronym ADEPT?
Alternate Door Exiting Procedures for Training
What is the reference for Static Line Parachuting Techniques and Training?
TC 3-21.220
What is the weight of the T-11 main parachute?
Approximately 38 lbs
What are the safe drop speeds (min to max) for the T-11 main parachute?
50-150 knots
What is the average deployment time for the T-11 main parachute?
6.5 seconds
What is the rate of decent for the T-11 main parachute?
Approximately 18.5 feet per second with a suspended weight of 400 lbs
What are the ten major components of the T-11 main parachute?
- Universal Static Line Modified
- Deployment Bag
- Drogue Parachute
- Bridle Assembly
- Deployment Sleeve
- Canopy Assembly
- Slider
- Riser Assembly
- Harness Assembly
- Pack Tray
What are the major components of the T-11 main parachute seen or touched during JMPI of a properly rigged jumper?
- Universal Static Line Modified
- Riser Assembly
- Harness Assembly
- Pack Tray
What is the rated capacity of the Universal Static Line Snap Hook?
1,750 lbs
What is the length of the Universal Static Line Modified?
Approximately 15 feet
What is the tensile strength of the Universal Static Line Modified?
4,000 lbs
What is the form number for the Army Parachute Log Record?
DA Form 3912
How many webbing retainers are on the parachute harness?
6 (2x leg, 2x chest, 2x back)
Does the “L” Shaped Ejector Snap Pad need to be present for the parachute harness to be serviceable?
No, it is a comfort item
Does the Diagonal Back Strap Pad need to be present for the parachute harness to be serviceable?
No, it is a comfort item
What are the dimensions of the T-11 main parachute pack tray assembly?
20” long, 16” wide, 14” deep
True or Fasle: The T-11 main parachute must have 2 serviceable Static Line Slack Retainer Bands attached to the Static Line Slack Retainer Loop for the pack tray to be serviceable
True
What is the rate of decent for the T-11 reserve parachute?
Approximately 26 feet per second with a suspended weight of 382 lbs
How much does the T-11 reserve parachute weight?
14.8 lbs
What are the major components of the T-11 reserve parachute?
- Ripcord Assembly
- Reserve Closing Loop
- Protection Cap
- Ejector Spring Assembly
- Reserve Extractor
- Reserve Canopy
- Reserve Risers
- Reserve Pack Tray
What are the major components of the T-11 reserve parachute that are seen or touched while performing JMPI on a properly rigged jumper?
- Ripcord Assembly
- Reserve Closing Loop
- Reserve Risers
- Reserve Pack Tray
True or False: On the T-11 reserve parachute, the left and right Pack Closing Flaps have one grommet each
False. The left and right Pack Closing Flaps have two grommets each, while the top and bottom have one
What amount of force must be applied to the ripcord assembly to activate the reserve parachute?
14 lbs of pull
What are the three phases of Sustained Airborne Training?
- Actions in the Aircraft Brief (SERJT/E) and Mock Door Training
- Pre-Jump Training
- Parachute Landing Falls
True or False: The three phases of Sustained Airborne Training are required to be conducted in sequence
False. It is highly recommended they are conducted in logical sequence, but commanders can authorize deviations if training requirements or apparatus restrictions do not allow
What does the acronym SERJT/E stand for?
- Static Line Control
- Exiting Procedures
- Red Light Procedures
- Jump Refusals
- Towed Jumper Procedures
- Emergency Procedures
During Mock Door Training, what is the last exit to be performed?
The planned exit for the airborne operations
How many exits are required during Mock Door Training?
At least two exits
What are the two preferred formations for Pre-Jump Training?
The extended rectangular formation and the horseshoe formation
When jumping the T-11 what is the count when jumping from rotary wing aircraft (UH-60, CH-47)?
8000
What is the minimum height for the PLF platform?
24 inches
What are the authorized sizes and thickness of Suspension Pads in the ACH?
Size 6 (3/4” thick)
Size 8 (1” thick)
When should jumpers begin donning parachutes?
No more than one hour prior to load time
Who can run a corrections station?
Anyone
What is the role of the PJ during JMPI?
Observe and supervise, only perform JMPI to facilitate meeting Station Time
Who loads jumpers into aircraft ensuring all seats are filled, seat belts are fastened, and personnel are in stick order?
Safeties