Werribee / Williamstown Flashcards
SKN on the DOWN (DOWN ONLY)
1) Arrive into P2
2) Change ends
3) Receive proceed from Dwarf to the Up Through Suburban. M Route Indicator is required
FSY on the UP
1) Arrive into P5
2) Change ends
3) When the points have been set for the route via the quadrant lever (A. Key locked point location), Green hand signal will be displayed
4) Drive through crossover to the Down line
FSY on the DOWN
1) Arrive into P6
2) Change ends on the platform w/ CE on West End
3) Push out in the down direction with Home Signal at proceed beyond the Annett Key locked crossover
4) When the points have been set for the route via the quadrant lever, Green hand signal will be displayed
5) Drive through crossover to P5
NO WALKING PATH
NPT on the UP (TERMINATING FROM WER)
1) Arrive P1
2) Change ends
3) Receive proceed aspect on Home signal to Down Werribee line or to NPT Stabling Sidings
NPT on the UP (WILLIAMSTOWN P1)
1) Arrive into P1
2) Shunt into Altona Sidings
3) Change ends
4) Re-dock to P2
NPT on the UP (FROM WILLIAMSTOWN P2)
1) Arrive into P2
2) Change ends
3) Depart on the DOWN
NPT on the Down
1) Arrive into P2
2) Change ends
3) Receive a proceed aspect on Home signal and diverge to the UP line
WTO on the UP
1) Arrive P1
2) Change ends
3) Receive modified ATC SCO, drive in down direction to LAV
WTO on the DOWN
1) Arrive into P2
2) Change ends
3) Receive a modified ATC SCO, drive in an UP direction to ALT
OR
1) Change ends on platform and with a CE in the West end of
2) Push out behind Up Home Arrival signal
3) Receive a proceed aspect on Home Arrival and drive to P1
NO WALKING PATH
LAV on the DOWN EAST LINE
1) Arrive into P2
2) Change ends
3) Receive a proceed aspect on Departure signal to either East Line or Altona Loop
OR
1) Arrive into P1
2) Change ends
3) Receive a Proceed aspect on the Departure signal to either West, East or Altona Loop Lines
LAV on DOWN WEST LINE
1) Arrive P1
2) Change ends
3) Receive a proceed aspect on Departure signal to either West, East or Altona Loop Line
LAV on the DOWN ALTONA LOOP LINE
1) Arrive onto any platform
2) Change ends
3) Receive proceed aspect and be routed according to the platform departing from
LAV on the UP WEST LINE
1) Arrive P1
2) Change ends
3) Receive a proceed aspect on the departure signal to either East or West
LAV on UP EAST LINE
1) Arrive P2
2) Change ends
3) Receive a proceed aspect on Departure signal to the East Line only
OR
1) Arrive into P3
2) Change ends
3) Receive a proceed aspect on Home Signal towards Departure signal and the East Line only
AIR on the DOWN (DOWN ONLY)
1) Arrive into P1/P2
2) Change ends
3) Receive a proceed aspect on the Home Signal to drive in the up Direction
WER on the DOWN
1) Arrive into P1/P2/P3 from either East or West Line
2) Change ends
3) Receive a proceed aspect on the Home signal to either the East or West Line