Welding Safety

Question 1

The time you spend learning & practicing _______ can save your life and the lives of others.

Answer 1

Safety procedures

Question 2

In construction, keeping your work area clean and free of scraps or spills is referred to as______

Answer 2

Housekeeping

Question 3

The federal agency whose mission is to save lives, prevent injuries, and protect the health of America’s workers is the _______

Answer 3

Occupational safety and health administration (OSHA)

Question 4

A _________ inspection is conducted after an accident that requires hospitalization of three or more workers

Answer 4

Catastrophe

Question 5

______________ must be reported to your supervisor.

Answer 5

All injuries, accidents, and incidents

Question 6

The four leading causes of death in the construction industry include electrical accidents, struck by accident, caught in or caught between accidents and _______.

Answer 6

Falls

Question 7

The process of hazard recognition, evaluation, and control is the foundation of an effective _______ program.

Answer 7

Safety

Question 8

People should not be able to get past _______ barricades.

Answer 8

Protective

Question 9

_______ are PPE used to prevent falls and protect workers to do fall.

Answer 9

Personal fall arrest system is

Question 10

Metal ladders should not be used near ________.

Answer 10

Electrical equipment

Question 11

If you lean a straight ladder against the top of a 16 foot wall, the base of the ladder should be _______ feet away from the base of the wall.

Answer 11

Four

Question 12

On construction sites where there is a break in elevation of 19 inches or more, and no ramp, runway, sloped embankment or personal hoist is provided, _______ may be used.

Answer 12

Scaffolds

Question 13

OSHA Construction standards require _________ foot candles of light in stairways.

Answer 13

5

Question 14

The two basic types of scaffolds are ________.

Answer 14

Manufactured and rolling scaffold

Question 15

The most common cause of death for equipment operators is _______.

Answer 15

Equipment rollover

Question 16

To reduce the risks of workers being hurt or killed by falling materials, do not stack materials higher than a _________ height to base ratio.

Answer 16

4:1

Question 17

A ____ is an ______ That is deeper than it is wide, and usually not wider than 15 feet.

Answer 17

Trench; excavation

Question 18

Most cave-ins occur in trenches 5 to _______ feet deep and happen suddenly with little or no warning.

Answer 18

15

Question 19

In every trench over 4 feet deep, there must be an exit every_________.

Answer 19

25 feet

Question 20

Observing proper safety precautions when working with and around electrical current is important because the human body ______.

Answer 20

Can conduct an electrical current.

Question 21

The minimum safe working distance from exposed electrical conductors _________.

Answer 21

Depends on the voltage.

Question 22

What provides the best eye protection?

Answer 22

Safety goggles

Question 23

The best shoes to wear on a construction site _______-approved.

Answer 23

ANSI

Question 24

A ______ Has its own clean air supply.

Answer 24

Self-contained breathing apparatus

Question 25

HazCom classifies all paint, concrete, and wood dust as ______ materials.

Answer 25

Hazardous

Question 26

Under HazCom, if you spot a hazard on your job site you must ______.

Answer 26

Report it to your supervisor

Question 27

Routes of exposure to hazardous material includes inhalation, ingestion and ______

Answer 27

Absorption

Question 28

Work that is performed near a hazard but no direct contact with it is called _________.

Answer 28

Proximity

Question 29

A confined space _________.

Answer 29

Has a limited amount of ventilation.

Question 30

___________ must be present in the same place at the same time for a fire to occur.

Answer 30

Oxygen, heat, and fuel