Week 1 Flashcards
35’ ladder - closed/weight
20’
135 lbs
Where shall length be marked on portable ladders?
On the side of the rails within 12” of the end
24’ ladder (closed/weight)
14’
80lbs
20’ straight weight
55lb
20’ hook ladder weight
60lbs
12’ hook ladder weight
35lbs
14’ A frame (closed/weight)
7’
35lbs
10’ folding ladder
11’
16lbs
12’ telescoping ladder (closed/weight)
32”
32 lbs
A versatile ladder that can serve as a straight ladder or be converted to “A” ladder
Combination ladder
Swivel butt plate consisting of ribber tread or spike
Safety shoe
Marine companies carry what type of ladders
12 foot
20 foot
Portable hook ladders
Marine company ladders are painted black except for:
The hooks
18” at base of beam - painted white
Length and company are stenciled on exterior of beams
Base of aluminum ladder provided with
Swiveling rubber shoes and aluminum spikes
Or
Steel spikes
The rubber pads should be utilized when the ladder is to be raised on
Hard surfaces
Advantages of aluminum ladders
Lighter
Will not weaken with age
THEY WILL DENT
THEY WILL NOT BEND
WILL NOT CHIP OR CRACK
WILL NOT FAIL BECAUSE OF OVERLOADS
Disadvantages of aluminum ladders
Conduct electricity
Conduct heat rapidly
If exposed to excessive heat exposure, even for brief period, may lose heat treatment
Sign of loss of structural strength in aluminum ladder
Discoloration
If ladders can not be held securely on a spare apparatus what should be done?
Fire tools and equipment unit shall immediately be notified by phone. A requisition shall be forwarded and and an entry made in company journal
Pending repair, to secure ladders safely, temporary fastenings shall be checked
After each response
If a officer feels a ladder can not be temporarily secured to a spare appartus in a safe manner and there is danger of loss of the ladder during a response then…
The ladder shall be left off the apparatus and entry shall be made in the company journal
Where are markings on the straight ladders?
End of each rail
Where are the markings on extension ladders?
At the butt end of each rail
Where are Unit designations marked on Ladders?
Within 18” of each butt end