Warning Systems

Question 1

If the upper ECAM screen fails

Answer 1

E/WD data automatically transfers to the SD

Question 2

If the lower ECAM screen fails, what crew action is required to view the data normally contained on the screen`

Answer 2

SD data can be displayed on upper ECAM by pushing and holding any SYS button

Question 3

What aural warning sounds during a Level 2 ECAM

Answer 3

Single chime

Question 4

What aural warning sounds when the MASTER CAUT light illuminates

Answer 4

Single chime

Question 5

A continuous repetitive chime, synthetic voice, or specific sound indicates a/an

Answer 5

Level 3 ECAM

Question 6

What is a characteristic of a level 3 ECAM indicates a/an

Answer 6

Required immediate action

Question 7

Blue colored text on the ECAM memo section signifies

Answer 7

Actions to be carried out

Question 8

Red colored text on the ECAM memo section signifies

Answer 8

Immediate action required

Question 9

A blue item on the takeoff memo indicates a checklist item that is

Answer 9

To be accomplished

Question 10

A cavalry charge aural signal indicates a

Answer 10

A/P disconnected

Question 11

A triple click aural sound indicates

Answer 11

Landing capability change

Question 12

What does the green arrow on the memo section of the E/WD indicate

Answer 12

More than one page of alert messages is available for display on the E/WD

Question 13

T.O. INHIBIT is active

Answer 13

From takeoff power application to 1500 feet AGL, or for two minutes after takeoff

Question 14

What is the function of the T.O. INHIBIT

Answer 14

Eliminates unnecessary distractions during takeoff

Question 15

The T.O. INHIBIT DOES NOT inhibit which of the following

Answer 15

ENG 1 (2) OIL LO PR

Question 16

The T.O. INHIBIT DOES NOT inhibit which of the following

Answer 16

F/CTL L (R) SIDESTICK FAULT

Question 17

LDG INHIBIT is active

Answer 17

From 800 feet AGL to 80 Knots

Question 18

What does pushing the T.O. CONFIG button on the ECAM control panel do

Answer 18

Simulates takeoff power application to trigger a warning if the aircraft is not properly configured for takeoff

Question 19

The T.O. CONFIG button checks all of the following except

Answer 19

CAB PR LO DIFF PR

Question 20

How can a cleared ECAM be recalled

Answer 20

Pressing the RCL button

Question 21

What is a characteristic of the ECAM STATUS page

Answer 21

Displayed manually by pushing the STS button on the ECAM control panel

Question 22

What happens when the ECAM EMER CANC button is pushed when a RED ECAM Warning is active

Answer 22

Present aural warning is cancelled

Question 23

Which of the following would cause an ENG THR LEVERS NOT SET warning during takeoff

Answer 23

Thrust levers are in the FLEX/MCT detent and a flex temperature was not entered into the TAKEOFF performance page