vocab

Question 1

A-1

Answer 1

input signal from T1 and CT5, directly proportional to load current. sends output signal to S12, R1, then back to A1 (DC voltage)

Question 2

A-2

Answer 2

Receives DC potential and illuminates LED Lamps

Question 3

A-3

Answer 3

Receives AC input from CT1, CT2, and CT3. Converts AC input into DC and provides DC to M9.

Question 4

A-4

Answer 4

Receives an AC signal from T7, T8, and T9. AC signal is proportional to load (CT1, CT2, CT3) Felt at A3 provides S6 with potential for M8.

Question 5

A-5

Answer 5

works with MPU and A6. Houses S13 and S14

Question 6

A-7

Answer 6

recieves AC Signal from T7 (L1 and L0). Converts to DC and provides M2 -DC is directly proportional to frequency of generators output.

Question 7

A-8

Answer 7

Diodes and Resistors (R6-R9, R10-R12, R14, R15, CR1-CR4)

Question 8

CB1

Answer 8

Circuit breaker that protects DC circuits (7.5A) Receives 24VDC potential from S10, through CR1, and S17

Question 9

CB3

Answer 9

provides 120VAC to J1. J1 ground fault de-energizes J1 on hot and neutral phases

Question 10

CBGND

Answer 10

provides control box housing with DC negative potential

Question 11

CPGND

Answer 11

provides control panel with DC negative potential

Question 12

CR1

Answer 12

mounted on A8. protects DC circuits from reverse bias condition (battery connected backwards)

Question 13

CR2

Answer 13

connected in series with R14. protects field windings in reverse bias

Question 14

CR3-CR7

Answer 14

provides protection from reverse bias

Question 15

CR6

Answer 15

protect L5 in the event of short circuit or reverse bias condition

Question 16

DS1, DS2, DS3

Answer 16

24VDC lights are used to illuminate control panel

Question 17

DS4 and DS5

Answer 17

Sync lights receive AC from S11

Question 18

DS6

Answer 18

illuminates when S7 is activated. terminal 1 receives positive DC from terminal 9 of TB6. receives 2 negative potentials (terminal 2 and terminal 3)