Van Test Questions Flashcards
Show me how you would check that all doors including cargo doors are secure
All doors must be closed and locking levers for cargo doors are set in the recommended secured position
Show me how you would check for air leaks on this vehicle
Charge the air tanks,consult gauges for drops in air pressure.
Walk round the vehicle and listen for any obvious leaks
Tell me the main safety factors involved in loading this vehicle
The load should be evenly distributed throughout the length of the vehicle so as not to affect control while the vehicle is being driven. Any load must be carried so that it does not endanger other road users. It must be securely stowed within the size and weight limits of the vehicle. The load needs to be secure so that it cannot move or fall from the vehicle when cornering or braking.
Tell me how you would check the condition of the reflectors on this vehicle
Ensure that reflectors are fitted, clean, and functional. Not cracked or broken
Tell me how you would check the condition of the windscreen and windows on this vehicle
The windscreen must be clean, clear and free from defects. No mascots or sticker that restricts view
Show me how you would check the condition of the mudguards on this vehicle
As part of daily walk around check ensure mudguards and spray suppression equipment are secure
Tell me how you would check your tyres to ensure that they are correctly inflated, have sufficient tread depth and that their general condition is safe to use on the road
Follow manufacturers guide, using appropriate equipment, check and adjust pressures when tyres are cold. Must have a tread depth of at least 1mm across 3/4 of the breadth and in a continuous band around the entire circumference. There should be no cuts, damage or signs of cord visible at the side walls
Tell me how you would check the condition of the windscreen wipers on this vehicle
Windscreen wipers must operate. Blades should be in good condition
Tell me how you would check the condition of the body is safe on this vehicle
As part of a daily walk around check, ensure the body is fully roadworthy and there are no significant defects. No loose panels or items, which could endanger other road users. All inspection panels must be secure
Show me how you would check the correct air pressure on this vehicle
Ensure gauges are reading the correct pressures for the vehicle and that all warning lights are extinguished and audible warning devises are not sounding
Identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil
Identify dipstick / oil level indicator, describe check or oil Level against the minimum maximum markers
Show me how you would check the wheel nuts are secure on this vehicle
A visual check to identify any nuts that are obviously loose and check that the wheel nut indicators (if fitted) are in alignment
Show me how you would check the operation of the audible warning device on this vehicle
Demonstrate use of control
Tell me how you would check the condition of the suspension on this vehicle
As part of a daily walk around check, suspension should be checked for obvious damage or deterioration
Show me how you would check the brake lights are working on this vehicle ( I can assist you, if you need to switch the ignition on, please don’t start the engine)
Operate brake pedals, make use of reflections in windows, garage doors etc or ask someone to help
Identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level
Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level
Tell me how you would check that the headlamps, sidelights and tail lights are working
Explain. Operate switch (turn on ignition if nesessary) walk round vehicle
Show me how you would replace the tachograph disc on this vehicle
Candidate to demonstrate how to insert tachograph disc. Digital tachographs may require an explanation if the candidate does not have a digital card
Tell me how you would operate the loading mechanism on this vehicle
Candidates should be able to explain briefly the correct operation and safe working practice of specific machinery fitted to the vehicle. E.g. The tail lift, kneeling bus
Show me / explain how you would check the power assisted steering is working
If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the wheel just after moving off will give an immediate indication that the power assistance is functioning
Show me how you would check the direction indicators are working
Applying the indicators or hazard warning lights switch and check functioning of all indicators
Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer lev
Identify reservoir and check level
Show me what instrument checks you would make before and after starting the engine on this vehicle
Check to make sure all gauges and warning systems are working. Ensure that all gauges are reading correctly and that warning lights / audible warning devices are extinguished before moving away
Show me where the first aid equipment is kept on this vehicle
Candidate to indicate equipment if carried. Where equipment is not present, candidates should be able to explain under what circumstances ( i.e. Vehicle types, loads carried) it must be provided
