V-2 Unit Review Questions Flashcards
- What is the best way to ensure you are using the right bolt?
Check the illustrated parts breakdown (IPB)
The size of a bolt is stated in terms of….
Length, Diameter, And threads per inch
Which bolt would you use where shearing or sideways stress occurs
Clevis bolt
on egress systems which type of self locking nut may be reused
None, all self locking nuts are good for one time use only
when lock wiring, how many complete turns should you have on the pigtail?
4 to 6
locally manufactured hoses must be tested to…..
6,000 PSI
which condition requires replacing a hose that operates at or above 1,500 PSI
one or more broken wires in a suspected kink
which is one of the best useable conductors of electricity and also the most widely used in aviation
copper
A tripped circuit breaker indicates….
a short
for the free electrons in a material to move there must be a difference in the potential between two points. that difference is that one point must have an excess of…..
electrons; the second point must have a lack of electrons
which device produces voltage through chemical action
Voltaic cell
Why is FOD so dangerous to aircraft engines?
When one small piece of metal comes in contact witht he spinning engine blade it can chip the blade making two foreign objects which may knock off more chips
Which foreign material is most difficult to control
stone
when should you inventory all of the tools you brought on a job site, including TO’s Bench stock, and all your special tools
Before and after each job
If you have exhausted every effort to find a dropped piece of safety wire in a cock pit, including using a borescope, the next step is to….
place a detailed entry in the aircraft forms
empty foreign object damage (FOD) bags after each job and….
never place the bag where the contents may be spilled into the cockpit
which condition must exist for corrosion to occur
a metal that has a tendency to corrode must be present
which type of corrosion is an advanced form of intergranular corrosion that “lifts up” the surface grains of metal
exfoliation
which degree of corrosion may include blisters or scaling and flaking of the coating or paint with pitting as deep as 0.010 inch
moderate corrosion
which is an indication of corrosion on ordinary steel surfaces?
rust
you need to vacuum residue from surfaces after removing corrosion with metallic wool because metallic wool particles can create…..
galvanic cells creating galvanic corrosion
You are asked to install a F-16 canopy remover rocket motor with a lost number of OEA11J004-048. when was this item produced
September
the effect leap year could have on the due date of a time change item is that it may mistakenly schedule it a……
moth late
you are tasked to install an item with a date of manufacture of October 12. the 11P-series technical order states that the shelf life for this item is 108 months. when does the items shelf life expire
31 October 2021.
when should you copy the information from a new egress explosive component?
Before you install the component
when filling out an AF Form 2005, issue and turn-in request, for an issue request, if an items national stock number (NSN) is not available, what must you provide in addition to the AF Form 2005?
DD Form 1348-6, DOD single line item requisition system document (Manual-Long Form)
in addition to the AF Form 2005, Issue /Turn-in Request, and the condition status tag, which other form must be attached to parts turned into supply?
AFTO Form 350, Reparable item Processing Tag
On the air forces technical order “AFTO” form 350, reparable item processing tag, a shop technician would enter the final action taken code by the area labeled
SHOP ACTION TAKEN, in block 15B
the three processes of maintenance data documentation (MDD) are collection, …..
storage and retrieval
which of the following is responsible for reviewing data entered into a maintenance data documentation (MDD) system on a daily basis
workcenter and shift supervisors
to evaluate/isolate/eliminate documentation problems in the intergrated maintenance data system (IMDS), every unit must establish a
data integrity team (DIT)
What is the intended use of the maintenance data documentation (MDD) system at base level
Provide information feedback to base managers and supervisors for controlling the maintenance operations
which is a specific use of the maintenance data documentation (MDD) system at off-base level
provide information to manage various programs established by the air force and major command regulations and manuals
which is an example of off equipment maintenance
installing an inertia reel on a seat that has been removed from an aircraft and taken to a shop
the three key data elements used to authorize and control maintenance and provide production credit information for work completed are
JCN, Work center code, and ID number
a work center with training equipment not assigned to maintain but requiring maintenance support would be
a non-performing work center
what consists of five characters and is used to identify equipment on which maintenance was performed or from which an item was removed
identification number
the part of a job control number (JCN) representing the sequential day is the
first five characters
(2024001) 01 January 2024
if you find two unrelated discrepancies on the same piece of paper what is the best way to use the job control number (JCN)
each discrepancy will have its own JCN
during which inspection would you use the same job control number (JCN) as the inspection to document he discrepancy?
major inspection.
which maintenance includes all of the known or predictable requirements that can be planned or programed to be completed on a long or short-range schedule
scheduled
in order to provide records of maintenance, inspection, service configurations, and flight records we use the Air Force Technical Order (AFTO) form series
781
the individual responsible for ensuring all applicable in process inspections (IPI’s) were completed for a task is the
technician who clears the original discrepancy
on the Air Force Technical Order (AFTO) Form 781A, maintenance discrepancies and work documents, how are Facilitate Other Maintenance (FOM) discrepancies documented?
As separate entries with the appropriate red symbol
in the integrated maintenance data system (IMDS) how many units would an egress journeyman take to clear a phase inspection discrepancy
Zero
in the Integrated Maintenance Data System (IMDS), what should you do after you hit <XMIT> on screen 929, create/correct narrative</XMIT>
complete a maintenance snapshot inquiry on screen 122 to ensure work order has closed out
within the integrated maintenance data system (IMDS) to find out what egress systems items are installed in a canopy, you should use what screen?
Screen 257, Egress Configuration List
in the integrated maintenance data system (IMDS) you can enter a part number to generate a report that lists all components in the database with that part number by using what screen?
412, Part number/serial number inquiry
in the integrated maintenance data system (IMDS) you can produce a listing of all the parts/serial numbers assigned to a particular job standard (JST) using what screen?
469, job flow package inquiry
on the planning requirements documents (PRA), you would find overdue time changes on part
Two
which inspection requires skill, equipment, and facilities beyond your normal duties?
programed depot maintenance
during which aircraft inspection are safety pins removed to prepare for flight?
end of runway (EOR)
which aircraft inspection is preformed prior to takeoff at intermediate stops for refueling or other normal requirements
Thru-flight
what would an egress journeyman inspect during an hourly postflight inspection
corrosion on ejection seat components
during which aircraft inspection would ejection seats be removed from the aircraft, disassembled, cleaned, and painted?
periodic phase
what interval does the isochronal inspection concept use for scheduling inspections?
calendar intervals
a major inspection is computed from the programmed
start date of the last major inspection
which isochronal inspection is a combination inspection of former basic post flight and hourly postflight inspections?
home station checks
who can approve home station checks schedule deviations?
Lead command functional manager.
who performs acceptance inspections ?
maintenance personnel from the gaining unit
on the Martin Baker seat, components mad from which type of metal are highly suspectable to corrosion
Magnesium
during an F-6 canopy inspection, what would you use to check for bolt holes which would otherwise not be visible
prism
which advanced concept ejection seat (ACES) II component would you functionally check during a 36 month inspection
SEQUENCE START SWITCH
Fire control handles
Emergency deployment handle
Seat not armed lever
Oxygen quick disconnect
Who decides to alert the rest of the air force to the results of a One-Time Inspection (OTI)
The lead command
During which inspection phase would personnel discus what can reasonably be accomplished during the time allotted
Pre-Inspection phase
which inspection phase prepares the aircraft for a functional check flight
post flight inspection
on the advanced concept ejection seat (ACES) II, which explosive component rolls the seat about its horizontal vector to its trajectory
Trajectory divergence rockets
on the advanced concept ejection seat (ACES) II, which type of aircraft seats have single firing control handles?
F-16 and F-22
