URQs 001-004

Question 1

1. (001) What is the minimum number of fully qualified people that the Air Force instructions require to be present when you must work on an energized circuit?
   a. 1.
   b. 2.
   c. 3.
   d. 4.

Answer 1

2

Question 2

2. (001) Who is authorized to approve work on energized circuits and/or equipment?

a. Base Civil Engineer.
b. Flight Commander.
c. Facilities Superintendent.
d. Shop noncommissioned officer in charge (NCOIC).

Answer 2

A. Base Civil Engineer

Question 3

3. (001) Which boundary is based upon the arc fault on the surface of the skin and requires anyone within the boundary to wear the proper personal protective equipment (PPE)?

a. Arc flash.
b. Limited approach.
c. Prohibited approach.
d. Restricted approach.

Answer 3

A. Arc Flash

Question 4

4. (001) What is the minimum distance for the flash protection boundary for all energized equipment under 750 volts alternating current (VAC)?

a. 3 ft. 6 in.
b. 7 ft.
c. 20 ft.
d. 10 ft.

Answer 4

D. 10 ft.

Question 5

5. (001) What type of materials is prohibited to be worn when working near energized equipment?

a. Acetone, nylon, polyester, and rayon.
b. Cotton, nylon, and polyester.
c. Denim, rayon, and polyester.
d. Acetone, denim, and polyester.

Answer 5

A. Acetone, Nylon, Polyester, and Rayon

Question 6

6. (002) If the power cannot be turned off, what should you use to move the victim connected to a live circuit away from the energized conductor or the conductor away from the victim?

a. Wet rope.
b. Bare hands.
c. Insulated object.
d. Galvanized conduit.

Answer 6

C. Insulated Object

Question 7

7. (002) You never apply what to a burn because it causes more damage to the tissue?

a. Ice.
b. Dry dressing.
c. Clean bandage.
d. Burn ointment.

Answer 7

A. Ice.

Question 8

8. (002) What is the body’s natural attempt to keep oxygen-rich blood flowing to the most important organs, such as the brain, heart, and lungs?

a. Sweating.
b. Bleeding.
c. Shock.
d. Fever.

Answer 8

C. Shock

Question 9

9. (003) When filling out an Air Force Form 487, Generator Operating Log (Inspection Checklist), what site documentation are you checking for currency?
   a. Generator training letter, one-line diagrams, and operating instructions.
   b. Generator training letter and operating instruction only.
   c. Generator training letter, one-lines, and AF Form 719.
   d. Generator training letter, one-lines, operating instructions, and AF Form 719.

Answer 9

A. Generator training letter, one-line diagrams, and operating instructions.

Question 10

10. (003) Which Air Force form is a detailed log of power plant operations?

a. 487.
b. 719.
c. 1167.
d. 1197 .

Answer 10

C. 1167.

Question 11

11. (003) Which generator authorization request form is used during the planning and programming portion of a new project?

a. Generator authorization design request.
b. New facility generator authorization request.
c. Generator requirements request.
d. Generator disposition request.

Answer 11

A. Generator authorization design request

Question 12

12. (003) When is a fuel one-line diagram required at a generator site?

a. It is required at all generator sites.
b. If an external fuel tank is installed.
c. If the tank holds more than 200 gallons.
d. If a day tank is present

Answer 12

B. If an external fuel tank is installed.

Question 13

13. (004) Which technical order series covers generators?

a. 35C2.
b. 35E8.
c. 38G.
d. 88A.

Answer 13

A. 35EC2.