Unit 22 - Chapter 96 Flashcards
When air is forced through a heating coil, where the fan and cool are within the same unit, the unit is known as
A unit heater
Convectors use ___ to increase heat transfer
Metal fins
A radiator trap is a device used to
Allow only water to leave the radiator
The exhausted on an air separation tank consists of a series of ___ through which water is forced by the pump
Nozzles
Which of the following pieces of equipment is not a source of heat?
Air vent
Unit heaters differ from convectors in that they use ___ to increase heat transfer
Blowers
Radiators can be classified as
Wall hung, floor, leg less, and window
In fun coil type heaters, individual room temperature is controlled by
Dampers
Unit ventilators use
A mixture of inside and outside air
The difference between a convector and a radiator is
That one is made from cast iron and the other from steel or copper
Large areas such as warehouses, are usually heated with
Unit heaters
Air can be remove from steam heating systems by
Air vents
A radiator valve is used to control the amount of
Steam entering the radiator
The vacuum pump performs the following function
Returns the condensate back to the boiler
The level in the condensate receiver is automatically controlled by a
Float switch