Types Of Lathes 150101p Flashcards
The basic function of a lathe is to
Machine round work
A stylus Bears against the template and controls the cutting tool on
A tracer lathe
Which lathe has largely been replaced by CNC machines
The engine lathe
The best lathe to use when making one simple part is
The engine lathe
The size of a lathe is determined by
Maximum distance between centres and the amount of Swing
The compound rest may be rotated
360°
The apron hand will move the carriage by means of
The rack and pinion
The feed reverse lever reverses the movement of the
Carriage and cross slide
The Carriage is moved under power for turning operations by the
Feed rod
The feed change lever
Changes from Carriage feed to cross slide feed and Back Again
A left-hand offset standard tool holder is used for
Turning from the tailstock to the headstock
A revolving Center is installed in
the tailstock
The thread chasing dial is used to
Time when to engage the split nut when cutting a thread
The tailstock is locked in position on the ways of the lathe with
Tailstock clamp
The chuck best suited to hold odd shapes is
4 jaw Chuck
