Tuffcut SS Flashcards
Series 172
Inch and metric 1/8"-3/4" 3mm-20mm 3 flutes Center cutting Lengths 1&2 45° helix angle Steel, stainless steel, cast iron, special alloys, hardened steel ALtima Shank
Series 112
Inch and metric 1/8”-1” 3mm-25mm
3 flutes
Center cutting
Length 2
53° helix angle
Steel, stainless steel, cast iron, special alloys, hardened steel
TiN
Shank/DIN 6535 HB Weldon
Design for milling stainless steel, titanium, Inconel and other similar metals, where high cutting forces are generated. Works well as a finishing tool.
Excellent surface finishes.
High-speed and the capacities.
TiN coating adds lubricity to prevent edge build up.
High helix angle increases length of cutting edge engaged in the cut, reducing cutting load variations and prolonging tool life.
Series 174
Inch and metric 1/8"-3/4" 3mm-20mm 3 flutes Center cutting Lengths 1&2 45° helix angle Steel, stainless steel, cast iron, special alloys, hardened steel ALtima Shank Corner radius
Series 175
Inch and metric 1/4"-3/4" 6mm-20mm 5 flutes Center cutting Lengths 1&2 45° helix angle Steel, stainless steel, cast iron, special alloys, hardened steel ALtima Shank Corner radius
Series 176
Inch 1/4"-3/4" 5 flutes Center cutting Lengths 2&3 45° helix angle Steel, stainless steel, cast iron, special alloys, hardened steel ALtima Shank
Series 113
Inch and metric 1/8”-1” 3mm-25mm
6 flutes
Length 2
53° helix angle
Steel, hardened steel, stainless steel, special alloys
ALtima
TiN
Design for Milling stainless steel, titanium, Inconel and other similar metals, where high cutting force are generated. Works well as a finishing tool.
TiN coating adds lubricity to prevent edge build up.
ALtima coating provides high heat resistance that allows tools to be ran at higher speeds and feeds.
6 flute geometry lowers cutting force vibration, permitting higher feeds (at comparable chip loads) and improved tool life.
Weldon flats upon request.
