Troubleshooting Routing Flashcards

1
Q

You manage a network with multiple subnets connected to the Internet.
A user reports that she can’t access the Internet. You investigate the problem and find that she can access all
hosts on the private network, but no hosts on the Internet.
Which of the following is likely the cause of the problem?

Missing default route on a router

Switching loop on the user’s subnet

Incorrect default gateway setting on the computer

Duplex mismatch between a switch and a router

A

Missing default route on a router

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

You are the network administrator of a branch office of your company. The branch office network is part of a
WAN that covers most of the United States. The office has two Windows 2000 servers, two UNIX servers, one
Windows NT server, 90 Windows 98 clients, 40 Windows 2000 Professional clients, and five Macintosh clients.
Users have been complaining that they are unable to access resources over the WAN at the main
headquarters. You suspect that one of the routers between your office and the main headquarters is not
working properly.
What TCP/IP utility can you use to see if a router is not working properly?

nslookup

tracert

netstat

nbtstat

A

tracert

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

You have just connected a new computer to your network. The network uses static IP addressing.
You find that the computer can communicate with hosts on the same subnet, but not with hosts on a different
subnet. No other computers are having a problem.
Which of the configuration values would you most likely need to change?

IP address

DNS server

Default gateway

Subnet mask

A

Default gateway

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which of the following commands would display the output shown here?

host

mtr

route print

ifconfig

A

route print

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

You manage a network with multiple subnets connected to the Internet.
A user reports that she can’t access the new server used in the accounting department. You check the
problem and find out that her computer cannot access any server on that subnet, however the computer does
access other computers on other subnets as well as the Internet.
Which of the following is most likely the cause of the problem?

Switching loop on the user’s subnet

Incorrect default gateway setting on the computer

Missing route on the default gateway router

Incorrect VLAN membership of the accounting server

A

Missing route on the default gateway router

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

ou have configured a remote access server to accept dial-up connections for remote access clients.
Remote clients are able to connect successfully and access resources on the remote access server. However,
the remote clients are not able to connect to other devices located on the same subnet where the remote
access server is located.

Which action would likely correct the problem?

Enable proxy arp on the LAN connection for the remote access server.

Move the remote access policy from the remote access server to a RADIUS server.

Flush the ARP cache on each client computer on the private network.

Run the spanning tree protocol on the remote access server.

A

Enable proxy arp on the LAN connection for the remote access server.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

You are troubleshooting access to a server in a remote network. You use the tracert command and see the
following:

Tracing route to 192.168.2250

over a maximum of 30 hops:

1 2 ms 2 ms 2 ms 192.168.12.11

2 2 ms 2 ms 2 ms 192.168.11.1

3 5 ms 5 ms 3 ms 192.168.10.15

4 2 ms 2 ms 2 ms 192.168.9.1

5 5 ms 5 ms 3 ms 192.168.11.1

6 2 ms 2 ms 2 ms 192.168.10.15

7 5 ms 5 ms 3 ms 192.168.9.1

additional output omitted
What is the problem?

Broadcast storm

Switching loop

Routing loop

Missing default route

A

Routing loop

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Which of the following utilities would you use to view the routing table?

mtr

route

tracert

dig

traceroute

A

route

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Examine the following output:
4 22 ms 21 ms 22 ms sttlwaOlgro2.bb.ispxy.com [154.11.10.62]
5 39 ms 39 ms 65 ms plalcaOlgrOO.bb.ispxy.com [154.11.12.11]
6 39 ms 39 ms 39 ms Rwest.plalcao1gro0.bb.ispxy.com [154.11.3.14]
7 40 ms 39 ms 46 ms SVl-core-03.inet.ispxy.net [205.171.205.29]
8 75 ms 117 ms 63 ms dia-core-Ol.inet.ispxy.net [205.171.142.1]
Which of these commands produced this output?

nslookup

ping

pingroute

tracert

A

tracert

How well did you know this?
1
Not at all
2
3
4
5
Perfectly