Triggers & Flows Flashcards
After fueling is complete and approximately 10 minutes prior to gate departure (push).
Fasten Belts On
APU on busses
Fuel panel set
AML and flight Forms check
“Before start Checklist”
After all external doors are closed, and the cabin ready and guideperson ready for pushback reports are received.
Accomplish before pushback flow:
Flight deck door closed and secured
Doors/windows closed & locked.
“Below the line”
When cleared to start engines:
Start engine_______.
After each engine stabilized, accomplish captains after start flow:
Engine anti ice switches, as required
Generator(s), ON
After captain receives salute from guide person and ground equipment is clear.
“I have a salute”
After the after start flow has been accomplished on the first or both engines and the “I have a salute” callout has been made:
“Flaps _____.”
APU as required, flight control check.
Just prior to taxi:
“Clear left”
After Load Closeout reviewed, both engines running and flaps set for takeoff:
Captain’s Before takeoff Flow:
Takeoff Data & Bugs-check
HUD-set
Gen1 & gen2- ON
Air Conditioning & Bleeds-auto and set
Flaps-Set and Green Light
Stab Trim-Set
“Before takeoff checklist”
No less than two minutes prior to departure:
FO-“Flight attendants prepare for takeoff”.
When approaching number one position for takeoff:
Captain’s before taking the runway flow:
MCP/ND- check
Exterior lights-set
Min Take off fuel- Verify
“Below the line”