Triggers And Flows Flashcards
First Crew Flight of the day or after unobserved Mx in the flight deck
Origination Flow
Prior to every flight
General Preflight flow
-forward overhead panel
-forward panel
-pedestal
FO preflight flow
Audio Control Panel - set
Oxygen - Test and Set
Sun Visors and Roller shades - stowed
Seat - adjust
Rudder pedals - adjust
Seatbelt and shoulder harness - adjust
EFB - as required
After fueling is complete and approx 10 minutes prior to gate departure
Before Start Flow
FO before start flow
Flight Forms and AML - check
After all external doors are closed, and the cabin ready and guideperson ready for pushback reports received
Before Pushback Flow
FO before pushback flow
Flightdeck door - closed and secured
Probe heat switches - On
Hydraulic panel - set
Doors/windows - closed/locked
Anti-collision light - on
After engine(s) stabilized
After Start Flow
FO after start flow (single engine taxi)
ANTI-ICE switch(es) - verify
Air Conditioning and Bleeds - Set
FO after start flow (two engine taxi)
ANTI-ICE switch(es) - Verify
Air Conditioning and Bleeds - Set
-Flaps -set
-Recall Check
-Flight Control Check
After Load Closeout reviewed, both engines running and flaps set for takeoff
Before Takeoff Flow
FO Before Takeoff Flow
(FASTT)
STAB TRIM - set
FLAPS - Set and Green light
Takeoff Data and Bugs - Check
Air Conditioning and Bleeds - Auto and Set
T/O CONFIG switch (if installed) - Press
When approaching number one position for takeoff
Before Taking the Runway Flow
FO Before Taking the Runway Flow
MCP/ND - Check
Exterior Lights - Set
Minimum takeoff fuel - verify
After flap and slat retraction
PM After Takeoff Flow
PM After Takeoff Flow
(GFA AAA)
GEAR - Off or Up
FLAPS - UP/No Lights
AUTO BRAKE - OFF
Air Conditioning, Bleeds and Pressurization - Check
ANTI-ICE - As Required
APU - As Required
Climbing through 10,000 feet AFL
PF Climbing Through 10,000 feet Flow
PF Climbing Through 10,000 feet Flow
Sterile Flightdeck - Chime
Climbing through transition altitude
PF/PM Transition Altitude Flow
PF/PM Transition Altitude Flow
PFD/STBY Altimeters - STD
Captain:
-Landing Lights Off
-Runway Turnoff Lights - OFF
FO:
-Wing Lights - OFF
PM:
“Transition, standard”
PF:
“Standard”
Descending through 18,000 feet MSL (or FL180)
PF/PM Descent Flow
PF Descent Flow
(EAT AFR)
Exterior Lights - Set
ANTI-ICE - As Required
TERRAIN Display - Selected
AUTO BRAKE - As Required
FMS - Set
RADIOS and DISPLAYS - Set
PM Descent Flow
(FEAR PRT)
Exterior Lights - Set
FASTEN BELTS switch - On
ANTI-ICE - As Required
PRESSURIZATION - Check
Recall - Checked
TERRAIN Display- Selected
RADIOS and DISPLAYS - Set
Descending through the transition level
PF/PM Transition Level Flow
PF Transition Level Flow
PFD/STBY Altimeters - XX.XX
“<Appropriate>”</Appropriate>
PM Transition Level Flow
PFD/STBY Altimeters - XX.XX
“Transition, <appropriate>”</appropriate>
Descending through 10,000 feet AFL
PF/PM Before Landing Flow
PF Before Landing Flow
Sterile Flightdeck - Chime
“Before landing checklist”
PM Before Landing Flow
Flight Attendants - Notified (PA)
Accomplish Before Landing Checklist (to the line)
After the aircraft has cleared the runway
After Landing Flow
FO After Landing Flow
FLAPS - UP/No Lights
STABILIZER TRIM - 5 Units
AUTO BRAKE - OFF
FLIGHT DIRECTORS - OFF
Wx RADAR - OFF
Exterior lights - As Required
ANTI-ICE switches - As Required
FO Shutdown Flow
ENGINE START levers - CUTOFF
Transponder - STBY
ANTI-COLLISION Light - OFF
Air Conditioning and Bleeds - Set
Window Heat - OFF
PROBE HEAT - AUTO
ANTI-ICE - OFF
ELEC HYD PUMPS - OFF
EMER EXIT LIGHTS - OFF
ENGINE START switches - AUTO
O2/Engine Oil/Hydraulic Fluid Quantities - Check
Arrival Report - Send
Flightdeck Lights - As required
