transmission

Question 1

TQ/IP eaton transmission will be shown without reverse gear idler on test… but you must still remember what gears are what. so then if the mainshaft is spined to the input gear, which gear is selected….

Answer 1

3rd gear, direct drive.
Shift pattern from back of main transmission is. Reverse, Lo, 1, 2, 4, 3

Question 2

TQ/IP Where is the isolator in the shift ever?

Answer 2

mounted between the upper lever and lower lever.

Question 3

in shift bar housing, what component mounts to what

Answer 3

shift yoke(shift fork) mounts to yoke bar(shift rail,shift bar) that has shift bock(shift gate) mounted on the yoke bar that fits in housing.

Question 4

Can a Transfer case can have pto mounted as well as front axle drive?

Answer 4

Yes, especially when a large amount or torque is needed for an accessory

Mains transmission needs to be in gear

Question 5

Can a transfer case have only drive for front and rear?

Answer 5

Yes, must have a declutch

Question 6

Which style of transfer case is used when a reduction is needed for bot from and rear or rear only.

Answer 6

2 speed (4shaft) transfer case

Question 7

What is a drop box?

Answer 7

Similar to transfer case but sends power straight through to rear axles no gear ration change. Before PTO is engaged transmission must be stopped and not spinning.

Question 8

What is a power tower

Answer 8

It is a top mounted on auxiliary drive bolted on the top of the auxiliary transmission. It receives torque from countershafts and sends it to accessory requiring power