Training Bulletins

Question 1

TB 103- THE HYDRO FOAM NOZZLE AND JRC ARE CARRIED ON WHICH APPARATUS?

Answer 1

200 SERIES ENGINES

Question 2

TB 103- THE 1-1/2” IN LINE FOAM EDUCTOR IS CARRIED ON WHICH APPARATUS?

Answer 2

ALL ENGINES, 200 SERIES, 400 SERIES

Question 3

TB 103- THE TFT 1” BUBBLE CUP IS CARRIED ON WHICH APPARATUS?

Answer 3

ALL ENGINES, 200’S, 400’S, AND BRUSH PATROLS WITH FOAM CAPABILITIES

Question 4

TB 103- CLASS A FOAM REDUCES THE SURFACE TENSION OF WATER AND MAKES WATER HOW MANY TIMES MORE EFFECTIVE?

Answer 4

3 TO 5 TIMES

Question 5

TB 103- HOW DOES CLASS B FOAM WORK?

Answer 5

FORMS A BLANKET OVER FLAMMABLE LIQUIDS, SEALING FLAMMABLE VAPORS UNDER THE FOAM

Question 6

TB 103- IS THE HYDRO-FOAM NOZZLE ASPIRATING OR NON-ASPIRATING?

Answer 6

NON-ASPIRATING

Question 7

TB 103- WHAT IS THE OPTIMUM CLASS B FOAM RANGE?

Answer 7

3:1 TO 6:1

Question 8

TB 103- HYDRO-FOAM NOZZLES CAN OPERATE AT LOW NOZZLE PRESSURES (______PSI OR LESS)

Answer 8

75 PSI

Question 9

TB 103- HYDRO-FOAM NOZZLE INLET PRESSURE AND FLOW

Answer 9

100PSI, 660GPM

Question 10

TB 103- HYDRO FOAM NOZZLE STRAIT STREAM RANGE

Answer 10

180’

Question 11

TB 103- HYDRO-FOAM NOZZLE HAS WHAT SIZE INLET AND CAN BE ATTACHED TO WHICH ASSEMBLIES?

Answer 11

2-1/2”; WAGON BATTERY, PORTABLE MONITOR, LADDER PIPE

Question 12

TB 103- WHAT ARE THE 3 PORTS ON THE JET RATION CONTROLLER?

Answer 12

INLET, SUCTION, DISCHARGE

Question 13

TB 103- APPROX HOW MUCH CONCENTRATE WILL BE USED PER MINUTE WHEN OPERATING THE HYDRO FOAM NOZZLE AND JRC?

Answer 13

APPOX. 20 GALLONS PER MINUTE

Question 14

TB 103- WHAT NOZZLE MUST BE USED WITH THE 1-1/2” IN-LINE FOAM EDUCTOR?

Answer 14

125GPM

Question 15

TB 103- THE TFT IN-LINE FOAM EDUCTOR CAN PRODUCE CONCENTRATIONS OF FOAM BETWEEN _____TO_____%

Answer 15

0.25% TO 6%

Question 16

TB 103- WHEN USING THE IN-LINE FOAM EDUCTOR WITH 1-1/2” HOSE, WHAT IS THE DISTANCE FROM THE EDUCTOR TO THE NOZZLE?

Answer 16

150’

Question 17

TB 103- WHEN USING THE IN-LINE FOAM EDUCTOR WITH 1-3/4” HOSE, WHAT IS THE DISTANCE FROM THE EDUCTOR TO THE NOZZLE?

Answer 17

250’

Question 18

TB 103- WHAT DO YOU PUMP TO THE IN-LINE FOAM EDUCTOR?

Answer 18

200 PSI

Question 19

TB 103- WHAT IS THE FRICTION LOSS OF 1-3/4” HOSE WHEN USING THE IN-LINE FOAM EDUCTOR?

Answer 19

25 PSI PER 100’

Question 20

TB 103- WHAT PERCENTAGE SHOULD YOU SET THE IN-LINE FOAM EDUCTOR TO FOR CLASS B FUELS?

Answer 20

3%

Question 21

TB 103- YOU SHOULD FLUSH THE TFT IN-LINE FOAM EDUCTOR BELOW ______PSI

Answer 21

75 PSI

Question 22

TB 103- WHAT IS THE GPM, NOZZLE PRESSURE, AND FRICTION LOSS OF THE 1” BUBBLE CUP SPRAY TIP?

Answer 22

10/40 GPM, 100PSI NP, 25PSI/100’ FL

Question 23

TB 103- HOW LONG AFTER APPLICATION DO FOAM BLANKETS BREAK DOWN?

Answer 23

15-30 MINUTES