Train passed without tail lamp Flashcards
Do you send train entering section first, if you’re going to send train passed without tail lamp to the Signal Box in advance? (1)
Yes; regardless if half a train was proceeding, something is entering the section.
What is the bellcode for train passed without tail lamp to the Signal Box in advance? TS1-2 (1)
9 (with call attention).
What is the bellcode for train passed without tail lamp to the Signal Box in rear? TS1-2 (1)
4-5 (with call attention).
If a train passes without a tail lamp, or you are not sure if it has a tail lamp, what actions would you take, to the Signal Box in advance, if it meant you had to replace your signals back and the Driver saw an irregular sequence of aspects, to make the train stop? TS3-6.1 (3)
Send 2 (if not already done)
Send 1, then send 9.
If a train passes without a tail lamp, or you are not sure if it has a tail lamp, what actions would you take, to the Signal Box in advance, if you could replace your signals back and the Driver wouldn’t see an irregular sequence of aspects, to make the train stop? TS3-6.1 (2)
Send 2 as normal (if not already done) and replace signals and get confirmation from the Driver if the train is complete or not.
Would you replace your signals to danger if it would bring the train to a sudden stop if a train passes without a tail lamp, or you are not sure if it has a tail lamp? TS3-6.1 (1)
No
If you had to send train passed without tail lamp to the Signal Box in rear, what would you do with your block indicator? TS3-6.1 (1)
Nothing; keep it at train on line, with reminder.
When can you send train out of section to the Signal Box in rear? TS3-6.1 (2)
If you receive 2-1 from the Signal Box in advance.
If the Signaller at the advance Signal Box (or any other competent person) tells you that the train that passed without tail lamp, is complete with tail lamp.
If, before getting confirmation that the train that passed without tail lamp is complete, there is a train on the opposite line, heading towards the Signal Box where the train that passed without tail lamp came from, what must you do with that train? TS3-6.1 (5)
Stop the train (reminder on signal).
Tell the Driver the circumstances.
Instruct the Driver, that when the signal is cleared, to proceed at caution.
Tell the Driver to report if anything is seen to be wrong.
Signal the train normally.
If a train passes with a portable tail lamp on the rear but it is out (not lit) and you cannot deal with it yourself without bring it to a sudden stop, what must you do? TS3-6.3 (3)
Send 2-1 to Signal Box in rear, when train is beyond clearing point.
Send 2, then 1, then 9 to Signal Box in advance.
Tell Signaller at advance Signal Box that the tail lamp is out (there but not lit).
If a train passes with a portable tail lamp on the rear but it is out (not lit), would you caution trains on the opposite line? TS3-6.3
No
