Traffic Information Flashcards
Traffic information can be defined as…
Information issued by an air traffic services unit to alert a pilot to other known or observed air traffic which may be in proximity to the position or intended route of flight and to help the pilot avoid a collision (ICAO 4444)
Essential local traffic can be defined as….
Any aircraft, vehicle or personnel on or near the runway to be used, or traffic in the take-off and climb-out area or the final approach area, which may constitute a collision hazard to a departing or arriving aircraft (ICAO 4444)
In class D airspace, it is ATC responsibility to pass traffic information to?
VFR aircraft to help them to ‘see and avoid’, and to IFR flights if requested by the pilot
At Wessex, VFR aircraft follow certain entry/exit routes.
North: A, D, Devizes
South: B, C
VFR arrivals via northern routes should be passed traffic information about?
Both VFR and IFR departures routing to the north and vice versa. Same occurs in the South.
It is usually more pertinent to describe an VFR aircraft’s routing using a general compass direction because…
IFR pilots may be unaware of VFR route structure and VFR pilots may be unaware of SIDs
Aerodrome circuit traffic information will also be given to…
Any inbound traffic on the same direction as the aerodrome circuit
When should a following aircraft be informed of a preceding aircraft’t intentions?
When a fast aircraft departs behind a slower aircraft, or when two consecutive departures of a similar speed. If first aircraft is still on climb-out, second aircraft is given traffic information regardless of the eventual direction of flight.
If two aircraft are departing in the same direction, traffic information need only be given if the leading aircraft….
Is still visible to the controller when takeoff clearance is given to the following controller
Overflight directions are usually described by
Cardinal points
Overflights should be instructed to route overhead the threshold of the runway in use to ensure…
It routes behind departing traffic
Name the 3 general triggers for accepting responsibility of an aircraft?
A/c at holding point reports ready for departure.
Approach passes you a new inbound estimate.
Inbound aircraft makes it first call.
Traffic information to joining and departing aircraft about each other should include?
Aircraft Type. Direction of flight or exit/entry route. Time or position reference. Level Information.
Traffic information to joining aircraft about circuit traffic should include?
Direction of circuit. Runway in use by circuit traffic. Aircraft type and position on circuit.
Traffic information to circuit traffic about joining aircraft should include?
Aircraft type. Direction of flight or exit/entry route. Time or position reference.