Traffic Control Flashcards
SOLID RED LIGHT
Drivers facing a traffic control signal displaying a solid red light must..
bring their vehicles to a complete stop before the stop line or crosswalk that is directly in front of the vehicle. If there is no stop line or crosswalk drivers must stop before the intersection.
SOLID RED LIGHT
Vehicles must remain stopped at the red light until it turns green, unless…
safely turning right after stopping.
A solid double red light has the same meaning as a single red light
Right turn at red light
Unless a sign prohibits the turn, a driver may turn right at a red light after STOPPING COMPLETELY before the stop line or crosswalk, if..
the turn can be made safely after yielding to other traffic.
Left turn at red light
Unless a sign prohibits the turn, the only left turn permitted at a red light is onto a…
one-way street from a one-way street.
this turn is only permitted after the vehicle is brought to a complete stop before the stop line or crosswalk and if the turn can be made safely after yielding to other traffic
SOLID YELLOW LIGHT
When a green light changes to yellow, it warns that the light will change to red immediately and drivers must prepare to stop or..
clear the intersection
Drivers approaching an intersection with a solid (not flashing) yellow traffic control light must bring their vehicles..
to a complete stop before the stop line or crosswalk, unless a point has been reached at the intersection where stopping cannot be done safely.
Drivers already in the intersection and facing a yellow light must..
safely clear the intersection
SOLID GREEN LIGHT
drivers facing a solid green traffic control light are permitted to travel through the intersection without stopping, unless…
required to yield to oncoming traffic when turning left or to pedestrians in the crosswalk when turning right or left.
When approaching a green light, anticipate that it will turn yellow. A “stale” green light means..
the light has been green for a while and will turn yellow soon.
GREEN ARROW WITH GREEN LIGHT
drivers facing a traffic control light with a green arrow and solid green traffic control light may..
enter the intersection and proceed WITHOUT yielding in the direction indicated by the arrow. Drivers facing the green light may also proceed in the other directions when it is safe and legal.
GREEN ARROW WITH RED LIGHT
Drivers facing a traffic control light with a green arrow and red control light may..
enter the intersection and proceed WITHOUT stopping only in the direction indicated by arrow.
FLASHING RED LIGHT
Drivers facing a flashing red traffic control light must..
stop before the stop line or crosswalk. If there is no stop line or crosswalk, drivers must stop before the intersection.
FLASHING RED LIGHT (STOP!!)
Drivers should proceed only when it is safe and after..
yielding the right-of way. The flashing red light is treated like a stop sign.
When the lights in all directions are flashing red the intersection becomes a 4-way stop.
FLASHING YELLOW LIGHT
Drivers facing a flashing yellow traffic control light may proceed…
with caution after yielding to pedestrians and other vehicles within the intersection.
FLASHING GREEN LIGHT
Drivers facing a flashing green traffic control light are..
permitted to go through, turn left or turn right without stopping.
FLASHING GREEN LIGHT
Opposing traffic will be facing a red light; however a driver..
must yield to pedestrians or other vehicles lawfully in the intersection.
Yellow lights on a sign with a symbol indicate that caution is required because..
of school zones or areas, playground zones or areas, school crossings and pedestrian crossings.
When the yellow lights on a sign are flashing the driver must reduce speed to a maximum of..
30 km/h and yield or stop for pedestrians.
What are lane reversal signals?
Lane reversal signals are used to control the direction of traffic in specific lanes of a roadway
(Lane Reversal Signals)
A common use of this control is reversible lanes that change the flow of traffic during _________ times of the ___. The signal(s) over one or more _____ change between a ___ _ and a green _____.
different, day, lanes, red x, arrow
(Lane Reversal Signals)
SOLID RED X
when a red x is displayed over a driving lane, the driver does not enter or remain in the lane. This signal indicates that..
the lane is being used by oncoming traffic. Move safely into a lane with a green arrow.
(Lane Reversal Signals)
DOWNWARD POINTING GREEN ARROW
A driver facing the downward pointing green arrow is..
permitted to travel in that lane.
The word or symbol on the traffic regulation signs tell the driver what ___ or ______ be done at a specific ________ or ____, and provide information. The _____ and ______ will vary depending on the type of message.
can, cannot, location, time, shape, colour
Traffic regulation signs include those that show right-of-way and road access that is permitted or prohibited. They also show control of..
speed, turns, direction of travel, passing, traffic lanes, parking and crosswalks.
(Signs Shapes and Colours)
A RED CIRCLE AND SLASH ON WHITE BACKGROUND SQUARED SHAPED.
Action or activity within the circle is not permitted.
(Signs Shapes and Colours)
GREEN CIRCLE ON WHITE BACKGROUND SQUARE SHAPED
Action or activity within circle is permitted
(Signs Shapes and Colours)
REGULATORY MESSAGE ON WHITE BACKGROUND RECTANGLE SHAPED
Regulatory message such as speed limit
(Signs Shapes and Colours)
FLUORESCENT YELLOW GREEN BACKGROUND PENTAGON SHAPED
Indicates school zone/area or school crosswalk
(Signs Shapes and Colours)
WHITE MESSAGE ON BLACK BACKGROUND SQUARE SHAPED
Indicates lane control
(Signs Shapes and Colours)
INFORMATION OR PICTURE ON ORANGE BACKGROUND DIAMOND SHAPED
Provides construction area information
(Signs Shapes and Colours)
WHITE MESSAGE ON GREEN BACKGROUND RECTANGLE SHAPE
Provides information such as distance to destination.
(Signs Shapes and Colours)
WHITE MESSAGE ON BROWN BACKGROUND SQUARE SHAPED
/
WHITE MESSAGE ON BLUE BACKGROUND SQUARE SHAPED
Indicates place for fuel, food, lodging or assistance