Trade Supervisors Resposibilities Flashcards
Trade Supervisors Responsibility
Number 1
Applying supervision in accordance with the instructions in section 3 chapter 1.
“Supervision”
Trade Supervisors Responsibility
Number 2
Apply an inspection regime in accordance with the instructions in section 3 chapter 1.
“Inspection regime”
Trade Supervisors Responsibility
Number 3
Advising tradespersons of the applicable safety requirements and/or precautions.
“Safety Requirements”
Trade Supervisors Responsibility
Number 4
Ensure personal performing maintenance are authorised to do so.
“Authorised”
Trade Supervisors Responsibility
Number 5
Ensure that the complete, correct and approved maintenance instructions are being followed.
“Maintenance Instructions”
Trade Supervisors Responsibility
Number 6
Ensure tradespersons do not proceed past inspection checkpoints until inspected.
“Inspection Checkpoints”
Trade Supervisors Responsibility
Number 7
Advising Maintenance Manager (MM) of any unplanned disturbance to safety critical items or systems.
“Unplanned Disturbance”
Trade Supervisors Responsibility
Number 8
Advising the Maintenance Manager of any condition that may potentially adversely effect technical airworthiness and seek advice on subsequent reporting requirements.
“Technical Airworthiness”
Trade Supervisors Responsibility
Number 9
Recommending additional IMI requirements to the MM, as required.
“Additional IMI Requirements”
Trade Supervisors Responsibility
Number 10
Recording any IMI requirements in the recording and certification system, as directed by the MM.
“IMI Requirements”
Trade Supervisors Responsibility
Number 11
Completing applicable recording and certifications systems progressively and accurately for maintenance tasks personally performed.
“Progressively and Accurately”
Trade Supervisors Responsibility
Number 12
Ensureing tool control procedures are adhered to.
“Tool Control”
Trade Supervisors Responsibility
Number 13
Evaluating the efficiency and adequacy of maintenance activities, proposing changes as required.
“Proposing Changes”
Trade Supervisors Responsibility
Number 14
Ensure that the actions taken satisfy the task requirements.
“Actions Taken”
Trade Supervisors Responsibility
Number 15
Detailing required follow on tasks within the recording and certification system, if applicable.
“Follow on Tasks”
