Tools and equipment Flashcards
What is the hammer?
A tool with a heavy metal head mounted the right angles at the end of handle. Used to break things driving nails
What are some safety rules for the hammer?
make sure the head is not loose. Check and see that the handle is broken.`
What is the ruler?
A straight piece of plastic, metal or wood that is used for drawing straight lines and measure short distances.
What are some safety rules for the ruler?
Always keep ruler straight
Do not bend ruler or else it will break.
What is the sandpaper?
a piece of paper with sand stuck to it used to smooth and polish other surfaces
What are some safety rules for the sandpaper?
Do not rub on skin as it will cause irritation.
What is the panelpins?
A light slender nail that provides extra strength when fastened in place
What are some safety rules for the panelpins?
Very sharp so handle carefully
What is the scroll saw?
the scroll saw has a fine blade that moves up and down and is the coping saw
What are some safety rules for the scroll saw?
It is not advisable to get your fingers too close to the moving parts
What is the brand facer?
this is a high quality reliable and extremely safe machine for a general
What are some safety rules for the bandfacer?
Always keep the material flap on the platform and hold it with both hands and switch off when finished.
What is the pillar drill?
It is accurately a machine that is used to drill or tap holes or a variety of materials such as metal or wood
What are some safety rules for the pillar drill?
wear goggles and gloves. Check guard is fitted to the drill and is in place
What is the try square?
Used to test the edges of a piece of wood to check how square it is
