Tool ID

Question 1

Remove and replace slotted screws

Answer 1

Standard Screw Driver

Question 2

Move and replace Phillips screw

Answer 2

Phillips Screw Driver

Question 3

Turning fasteners where other wrenches cant fit

Answer 3

Open End Wrench

Question 4

Turn various adjusters jaws and fasteners

Answer 4

Adjustable Wrenches

Question 5

Loosening hexagonal bolts and other fasteners

Answer 5

Hex Keys

Question 6

Holding and turning pipe

Answer 6

Pipe Wrench

Question 7

tighten and loosen quickly

Answer 7

Ratchet Handle Wrench

Question 8

Hinged, can rotate to fit in different spaces and angles

Answer 8

Flex Socket

Question 9

Small thin conductors that melt when too much current travels through to protect the system.

Answer 9

Fuse

Question 10

Protect the electrical circuit

Answer 10

Breaker

Question 11

Supplies the current from the receptacle

Answer 11

Plugs

Question 12

Removing the protective coating of an electric wire in order to replace or repair the wire.

Answer 12

Wire Stripper

Question 13

Covers wires.

Answer 13

Switch Plate Cover

Question 14

Spreads piston rings.

Answer 14

Piston Ring Spreader

Question 15

excessive speed or irregularity on WFS

Answer 15

Spatter

Question 16

Too hot

Answer 16

Burn through

Question 17

used to measure external surfaces, made in ranges (1”-2”)

Answer 17

Outside micrometer

Question 18

A measuring tool with spring-loaded plunges

Answer 18

Telescope Gauge

Question 19

A precision instrument that can be used to measure internal and external distances extremely accurately.

Answer 19

Digital Caliper

Question 20

Tool used to measure widths

Answer 20

Feel Gauges

Question 21

Used to see if the spark plug is in working order or if it needs to be replaced

Answer 21

Spark Tester

Question 22

Tool most commonly used to properly gap a spark plug

Answer 22

Gap Gauges

Question 23

Used to compress rings into ring guides to replace piston into the cylinder

Answer 23

Ring Compressor

Question 24

Valve Spring Compressor-This tool is designed to reach into the small recesses where valve springs and retaining washers are located.

Answer 24

Valve Spring Compressor

Question 25

cylinder fitting closely within a tube in which it moves up and down against a gas, used in an internal combustion engine to derive motion

Answer 25

Piston

Question 26

regulates what enters and exits the internal combustion engine.

Answer 26

Intake or Exhaust Valve

Question 27

Tools used to keep the flywheel from spinning and Pulling it from the engine

Answer 27

Flywheel holder

Question 28

connects the crankshaft to the piston and converts reciprocating (up and down) motion into rotary (circular) motion

Answer 28

Connecting Rod

Question 29

Rotates to push piston up in cylinder, converts the reciprocating motion to rotary motion used by the application

Answer 29

CrankShaft

Question 30

responsible for valve timing, extremely important for efficient function of engine

Answer 30

Camshaft