Test: Guillermo Flashcards
What carries DL/UL signaling information?
SIB1 [153]
What PRACH Format extends cell range to 100 Km?
(long) Format 1 [363]
Long vs. Short PUCCH benefits
4 dBm Coverage improvement and more RRC Connections PER CELL [525]
Special Events increase capacity by
Disabling Carrier Aggregation. [575, 587]
CA enabled = 106 connections
CA disabled = 320 connections
PUCCH is limited by CA reporting Harq, Ack and CSI for each carrier.
More connections but less throughput.
What tool includes type0CoresetConfigurationIndex?
Throughput and Capacity Planning tool [90]
Adaptive PDCCH Configuration Tool [90]
NRDIM calculates
Expected Throughput [442]
* slot format
* number of beams
* sspbch period
* prach configuration index
DSS Ph3 allows 5G to use up to how many resources
100% DL and 70% UL resources [1001]
Nokia proprietary logical DSS Phase 1 Xp interface handles what?
Mgmt of resources’ split between LTE+NR carriers shared during DSS Phase 1 [997]
[998]
* LTE+NR schedulers discuss load information
* Single Shared carrier between LTE + NR [998]
* Same center frequency, bw and time for both
DSS Phase 1 splits resources how?
DL uses TDD resources
UL uses FDD resources
When planning RF what do you choose: microwave, transmission capacity or throughput KPIs?
KPIs for Throughput / Performance
5G NR PCIs
1008 PCIs organized into 336 groups of 3 [340]
NRBTS SA supports how many slices?
20 SNSSAIs [958]
nrCellIdentity concatenates what fields
nrBtsId and lcrid [740]
gnbIdlength (22 to 32 bits) means lcrid is (36-gnbIdLength) bits
nrCellIdentity = nrBtsId x 2^(36-gnbIdLength) + lcrid
What triggers Event A2?
Serving cell becomes poor (worse than threshold) [897]
What does NRBTS.NRSYSINFO_PROFILE.NRIAFIM supports?
Cell reselection towards NR Intra-Frequency
What does the Initial BWP include?
Coreset 0 and SS/PBCH are completely within Initial BWP [766]
‘Adaptive PDCCH Configuration Tool’ recommends
locationAndBandwidthDl: crbSizeDl = crbStartDl = coreset0
locationAndBandwidthUl: crbSizeDl = crbStartDl = sameAsDl
5G to 4G Neighbor planning uses MOs
LTEENB (NSA)
NRADJECELL + NRRELE (HOs)
NRRELLTE (DSS, not recommended to configure)
[681]
EdenNet helps with
Neighbor planning [33], e.g., rootSequenceIndex [605]
Example
zeroCorrelationZone = 10 means 64 preambles that can allocate these 13 indices: 168, 200, 232, 268, 324, 358, 390, 422, 454, 486, 518, 550, 600, 651
Note the indices are spaced unevenly
MIND can be used for
Consistency checking
* type0CoresetConfigurationIndex [91]
* beam angles [183]
* prachConfigurationIndex [387]
* Admission Control Thresholds [562]
* Max Num PxschAllocationPerSlot (UE scheduled) [676]
* pagingTargetRate [774]
* VoNR drbinactivitytimersa5qi1 [923]
* permitted chBw [972]
LTEPAT/EMIL/MUSA used for
Neighbor planning [33]
* Processing TTI logs to Indicate beam usage [279]
* DL TTI Traces include beam type information [282]
* Confirming DL SRS BF is working [284]
Quantify DL SRS Beam utilization [1019]
MOCN vs. MORAN differences
MOCN has multiple PLMNs per cell and shares all settings (nor lists, resources) among the PLMNs
MORAN dedicates a cell to a single PLMN, though multiple cells can mean multiple PLMNs
RADAR supports what technologies
GSM UMTS LTE 5G SRAN
IDCM benefits
E2E solution with
Faster schedule
Improved quality
Lower risk
zMail