Test 2 Transformers And That Flashcards
How many total degrees in a triangle?
90°
180°
120°
100°
180°
Where are triangular waves used?
1. music
2. triggering circuits
3. start-stop signals
4. power conversion amplifier
Music
The OPPOSITE side depends on?
1. The length of the side
2. The right angle
3. The angle we are referring to.
4. The coefficient of tangent.
The angle we are referring to
An autotransformer has how many windings?
1. 2
2. 1
3. 3
4. None of the above
- 1
the symbol for Impedance is?
1. R
2. 0
3. V
4. Z
Z
Where do we get skin effect?
1. In a de transmitted wave
2. In a power generator
3. In a Ac transmitted wave.
4. A transformer.
In a AC transmitted wave
A transformer cannot transform?
1. Voltage
2. Current
3. Frequency
4. Impedance
Frequency
In electrical Average is the measurement of?
1. The rectified power.
2. The Maximum voltage that is in an outlet
3. The Dc value of an AC wave.
4. The time for half an square wave to form.
The DC value of an AC wave
RMS stands for?
1. Root means square
2. Root makes sine
3. Root mixed salad
4. Root means Sangria
Root means square
What do Isolation transformers help filter?
1. Voltage spikes and Ground surges
2. Current surges and watt pulses
3. Current spikes and Voltage spikes
4. Voltage outages and Power fluctuations.
Current spikes and voltage spikes
In an Ac circuit You can only get a watt measurement from a?
1. A single phase transformer secondary side.
2. A curtent transformer
3. A Purely inductive circuit
4. A Purely resistive circuit
A purely resistive circuit
Who developed AC electricity for the 1904 World’s fair?
1. Nikolas Tesla and Westinghouse
2. Alexander graham bell and Thomas Edison
3. Bert and Ernie
4. Paul McCartney and Ringo
Nikolas Tesla and Westinghouse
In a transformer Power in is equal to?
1. Power in the armature
2. Power on the Load
3. Power out
Power out
How do we Identify the primary side or a transformer?
1. It is marked with the letter H
2. It has a larger wire attached to it
3. There are bigger letters on the primary side.
4. It has the Line attached to it
It has a line attached to it
In a transformer what are the values of voltage, current, and impedance proportional to
1.Power in the secondary
2. The amount of core material
3. The turn’s ratio
4. The frequency
The turns ratio