Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

CompTIA Network + ET > TEST 1 > Flashcards

TEST 1 Flashcards

1
Q

A UTM is deployed on the external edge of the main corporate office. The office connects to the WAN port of the edge router.
The edge router at the main office connects to the remote offices using GRE IPSec tunnels. A network administrator notices that a worm that was not detected by the UTM has spread from the remote sites into the corporate network. The UTM currently has traffic rules applied that should block the port used by the worm. Which of the following steps would MOST likely correct this issue?

A. Move the UTM onto the LAN side of the network
B. Enable TLS inspection on the UTM
C. Enable stateful inspection on the UTM
D. Configure the UTM to deny encrypted files from being transferred

A

C. Enable stateful inspection on the UTM

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

A technician has racked a new access switch and has run multimode fiber to a new location. After installing an extended-range 10Gb SFP in the core switch, the technician installed a 10Gb SFP in the access switch and connected the port to the new extension with a fiber jumper. However, the link does not display, and the technician cannot see light emitting from the core switch. Which of the following solutions is MOST likely to resolve the problem?

A. Swap the fiber pairs in one of the SFPs
B. Replace the jumpers with single-mode fiber
C. Set the correct MTU on the new interface
D. Install an optic that matches the fiber type

A

B. Replace the jumpers with single-mode fiber

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

A network technician has implemented ACLs to limit access to cloud-based file storage. Which of the following security mechanisms has the technician enforced?

A. DLP
B. IDS
C. WAF
D. WPA
E. TPM
A

C. WAF

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

A firewall administrator is implementing a rule that directs HTTP traffic to an internal server listening on a non-standard socket.
Which of the following types of rules is the administrator implementing?

A. NAT
B. PAT
C. STP
D. SNAT
E. ARP
A

B. PAT

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

A network technician receives a call from a user in the accounting department stating that Internet connectivity has been lost after receiving a new workstation. No other users in accounting are reporting similar issues. The network technician is able to ping the machine from the accounting department’s router, but is not able to ping the machine from the IT network. Which of the following is MOST likely the cause?

A. Incorrect default gateway
B. Duplicate IP address
C. Misconfigured OSPF
D. Improper VLAN assignment

A

A. Incorrect default gateway

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

A technician is installing a new wireless badging system on a hospital network. The requirements of the badging system are for it to have its own SSID and low power levels. The badging system has to cover 99.9% of the hospital. Which of the following is the BEST action to take to meet the system requirements?

A. Install additional WAPs
B. Install external antennas
C. Move the WAPs closer to the more populated area
D. Change the antenna types

A

A. Install additional WAPs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

A technician attempts to replace a switch with a new one of similar model from the same vendor. When the technician moves the fiber and SFP plug, the switch does not completely boot up. Considering that the config files are the same, which of the following is the MOST likely cause of the failure?

A. Damaged fiber
B. Corrupted operating system
C. VLAN mismatch
D. Bad port

A

B. Corrupted operating system

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

A company has hundreds of nodes on a single subnet and has decided to implement VLANs. Which of the following BEST describes the benefit of this approach?

A. It segments broadcast domains in the network infrastructure
B. It provides a faster port to all servers
C. It provides multiple collision domains on one switchport
D. It provides multiple broadcast domains within a single collision domain

A

A. It segments broadcast domains in the network infrastructure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

A company has completed construction of a new datacenter, and the IT staff is now planning to relocate all server and network equipment from the old site to the new site. Which of the following should the IT staff reference to determine the location of the equipment being moved?

A. Rack diagrams
B. Network topology
C. Standard operating procedures
D. Wiring documentation

A

A. Rack diagrams

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Which of the following would allow a device to maintain the same IP address lease based on the physical address of the network card?

A. MAC address reservation
B. Static IP address
C. IP address exclusion
D. Custom DNS server entry

A

A. MAC address reservation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

A technician wants to prevent an unauthorized host from connecting to the network via Ethernet. Which of the following is a Layer 2 access control the technician should implement?

A. Access control lists
B. Captive portal
C. WPA2
D. Port security

A

D. Port security

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

A network engineer is configuring wireless access for guests at an organization. Access to other areas in the organization should not be accessible to guests. Which of the following represents the MOST secure method to configure guest access to the wireless network?

A. Guests should log into a separate wireless network using a captive portal
B. Guests should log into the current wireless network using credentials obtained upon entering the facility
C. The existing wireless network should be configured to allow guest access
D. An additional wireless network should be configured to allow guest access

A

A. Guests should log into a separate wireless network using a captive portal

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

The server team has just installed an application across three different servers. They are asking that all requests to the application are spread evenly across the three servers. Which of the following should the network team implement to fulfil the request?

A. Proxy server
B. UTM appliance
C. Content filter
D. Load balancer

A

D. Load balancer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

A network technician is deploying mobile phones for a company’s sales staff. Salespeople frequently travel nationally and internationally to meet with clients, and often have to roam or switch cellular providers. Which of the following standards is the BEST option to fit the requirements?

A. GSM
B. TDM
C. CDMA
D. PSTN
E. MIMO
A

A. GSM

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

A network administrator has been given a network of 172.16.85.0/21 and wants to know the usable range of IP addresses on that subnet. Which of the following indicates the correct IP address range?

A. 172.16.80.0-172.16.85.254
B. 172.16.80.0-172.16.88.255
C. 172.16.80.1-172.16.87.254
D. 172.16.80.1-172.16.85.255

A

C. 172.16.80.1-172.16.87.254

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

A network technician is troubleshooting wireless network issues in a crowded office complex and suspects there is interference from nearby wireless networks. Which of the following should the technician perform to discover possible interference?

A. Site survey
B. Vulnerability scanning
C. Wardriving
D. Checking logical diagram
E. Bandwidth test
A

A. Site survey

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

A network technician is troubleshooting an issue and has established a theory of probable cause. Which of the following steps should the network technician take NEXT?

A. Test the possible solution
B. Question the users
C. Determine what has changed
D. Document the theory

A

A. Test the possible solution

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

A network technician has discovered a rogue access point under an empty cubicle desk. Which of the following should the technician perform to ensure another cannot be placed on the network?

A. Disable unused ports on switches
B. Enable DHCP guard to detect rogue servers
C. Configure WPA2 on all access points
D. Use TACACS+ authentication

A

B. Enable DHCP guard to detect rogue servers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Which of the following provides the ability to deploy consistent access point configurations from a central location?

A. Wireless controller
B. AAA server
C. WiFi-protected setup
D. Proxy server
E. VPN concentrator
A

A. Wireless controller

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

A network technician is configuring a wireless network at a branch office. Users at this office work with large files and must be able to access their files on the server quickly. Which of the following 802.11 standards provides the MOST bandwidth?

A. a
B. ac
C. g
D. n

A

B. ac

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

A network administrator configures a router with the following IP address information:
Gigabit Ethernet 1 Interface: 10.10.0.1/24
Serial 0 Interface: 10.10.0.253/30
Clients are connected to a switch on the gigabit Ethernet interface; the ISP is connected to the Serial 0 interface. When the router configuration is complete and client devices are reconfigured, all clients report that they are unable to connect to the Internet. Which of the following is the MOST likely reason?

A. The router was configured with an incorrect IP address
B. The router was configured with an incorrect default gateway
C. The router was configured with an incorrect subnet mask
D. The router was configured with an incorrect loopback address

A

C. The router was configured with an incorrect subnet mask

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

A penetration tester has been tasked with reconnaissance to determine which ports are open on the network. Which of the following tasks should be done FIRST? (Choose two.)

A. Network scan
B. Banner grab
C. Tracert
D. DHCP server check
E. Brute-force attack
A

A. Network scan

C. Tracert

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Users are reporting Internet connectivity issues. The network administrator wants to determine if the issues are internal to the company network or if there is an issue with the ISP. Which of the following tools should be used to BEST determine where the outage is occurring?

A. traceroute
B. ping
C. nslookup
D. netstat

A

A. traceroute

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Which of the following security mechanisms dynamically assigns a Layer 2 address and restricts traffic only to that Layer 2 address?

A. Sticky MAC
B. 802.1x
C. ACL
D. NAC

A

A. Sticky MAC

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

Which of the following is a vulnerable system designed to detect and log unauthorized access?

A. SIEM
B. Honeypot
C. DMZ
D. Proxy server

A

B. Honeypot

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

According to the OSI model, at which of the following layers is data encapsulated into a packet?

A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5
E. Layer 6
A

B. Layer 3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

Which of the following WAN technologies is MOST preferred when developing a VoIP system with 23 concurrent channels?

A. DSL
B. POTS
C. T1
D. DOCSIS

A

C. T1

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

A junior network technician is setting up a new email server on the company network. Which of the following default ports should the technician ensure is open on the firewall so the new email server can relay email?

A. 23
B. 25
C. 110
D. 143

A

B. 25

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

Which of the following policies would Joe, a user, have to agree to when he brings in his personal tablet to connect to the company’s guest wireless Internet?

A. NDA
B. IRP
C. BYOD
D. SLA

A

C. BYOD

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

In a service provider network, a company has an existing IP address scheme. Company A’s network currently uses the following scheme:

Subnet 1: 192.168.1.0/26
Subnet 2: 192.168.1.65/26

Company b uses the following scheme:

Subnet 1: 192.168.1.50/28

The network administrator cannot force the customer to update its IP scheme. Considering this, which of the following is the BEST way for the company to connect these networks?

A. DMZ
B. PAT
C. NAT
D. VLAN

A

C. NAT

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

A network engineer is designing a new network for a remote site. The remote site consists of ten desktop computers, ten VoIP phones, and two network printers. In addition, two of the desktop computers at the remote site will be used by managers who should be on a separate network from the other eight computers. Which of the following represents the BEST configuration for the remote site?

A. One router connected to one 24-port switch configured with three VLANS: one for the manager’s computers and printer, one for the other computers and printer, and one for the VoIP phones
B. Two routers with each router connected to a 12-port switch, with a firewall connected to the switch connected to the manager’s desktop computers, VoIP phones, and printer
C. One router connected to one 12-port switch configured for the manager’s computers, phones, and printer, and one 12-port switch configured for the other computers, VoIP phones, and printer
D. One router connected to one 24-port switch configured with two VLANS: one for the manager’s computers, VoIP phones, and printer, and one for the other computers, VoIP phones, and printer

A

A. One router connected to one 24-port switch configured with three VLANS: one for the manager’s computers and printer, one for the other computers and printer, and one for the VoIP phones

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

A network technician is troubleshooting an end-user connectivity problem. The network technician goes to the appropriate IDF but is unable to identify the appropriate cable due to poor labeling. Which of the following should the network technician use to help identify the appropriate cable?

A. Tone generator
B. Multimeter
C. OTDR
D. Loopback adapter

A

A. Tone generator

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

A network technician notices the site-to-site VPN and Internet connection have not come back up at a branch office after a recent power outage. Which of the following is an out-of-band method the technician would MOST likely utilize to check the branch office’s router status?

A. Use a modem to console into the router
B. Walk a user through troubleshooting the connection
C. Travel to the branch office
D. Hire a contractor to go on-site

A

A. Use a modem to console into the router

34
Q

A network technician is considering opening ports on the firewall for an upcoming VoIP PBX implementation. Which of the following protocols is the technician MOST likely to consider? (Choose three.)

A. SIP
B. NTP
C. H.323
D. SMB
E. ICMP
F. RTP
G. IPSec
H. RDP
A

A. SIP
C. H.323
F. RTP

35
Q

A device operating at Layer 3 of the OSI model uses which of the following protocols to determine the path to a different network?

A. STP
B. RTP
C. RIP
D. NTP
E. SIP
A

C. RIP

36
Q

A network administrator is setting up a web-based application that needs to be continually accessible to the end users. Which of the following concepts would BEST ensure this requirement?

A. High availability
B. Snapshots
C. NIC teaming
D. Cold site

A

A. High availability

37
Q

Which of the following devices should a network administrator configure on the outermost part of the network?

A. Media converter
B. Switch
C. Modem
D. Firewall

A

D. Firewall

38
Q

A company finds that many desktops are being reported as missing or lost. Which of the following would BEST assist in recovering these devices?

A. Asset tracking tags
B. Motion detectors
C. Security guards
D. Computer locks

A

D. Computer locks

39
Q

A technician is connecting a router directly to a PC using the G1/0/1 interface. Without the use of auto-sensing ports, which of the following cables should be used?

A. Straight-through
B. Console
C. Rollover
D. Crossover

A

D. Crossover

40
Q

A technician is diagnosing an issue with a new T1 connection. The router is configured, the cable is connected, but the T1 is down. To verify the configuration of the router, which of the following tools should the technician use?

A. Loopback adapter
B. Cable tester
C. Tone generator
D. Multimeter

A

A. Loopback adapter

41
Q

A network technician receives a call from a use who is experiencing network connectivity issues. The network technician questions the user and learns the user brought in a personal wired router to use multiple computers and connect to the network. Which of the following has the user MOST likely introduced to the network?

A. Rogue DHCP server
B. Evil twin
C. VLAN mismatch
D. Honeypot

A

A. Rogue DHCP server

42
Q

A technician is setting up a direct connection between two older PCs so they can communicate but not be on the corporate network. The technician does not have access to a spare switch but does have spare Cat 6 cables, RJ-45 plugs, and a crimping tool. The technician cuts off one end of the cable. Which of the following should the technician do to make a crossover cable before crimping the new plug?

A. Reverse the wires leading to pins 1 and 2
B. Reverse the wires leading to pins 1 and 3
C. Reverse the wires leading to pins 2 and 3
D. Reverse the wires leading to pins 2 and 4

A

D. Reverse the wires leading to pins 2 and 4

43
Q

Which of the following is the number of broadcast domain that are created when using an unmanaged 12-port switch?

A. 0
B. 1
C. 2
D. 6
E. 12
A

B. 1

44
Q

A network engineer wants to a segment the network into multiple broadcast domains. Which of the following devices would allow for communication between the segments?

A. Layer 2 switch
B. Layer 3 switch
C. Bridge
D. Load balancer

A

B. Layer 3 switch

45
Q

The Chief Information Officer (CIO) has noticed the corporate wireless signal is available in the parking lot. Management requests that the wireless network be changed so it is no longer accessible in public areas, without affecting the availability inside the building. Which of the following should be changed on the network?

A. Power levels
B. Overcapacity
C. Distance limitations
D. Channel overlap

A

A. Power levels

46
Q

A network technician is assisting the security team with some traffic captures. The security team wants to capture all traffic on a single subnet between the router and the core switch. To do so, the team must ensure there is only a single collision and broadcast domain between the router and the switch from which they will collect traffic. Which of the following should the technician install to BEST meet the goal?

A. Bridge
B. Crossover cable
C. Hub
D. Media converter

A

C. Hub

47
Q

Based on networks 10.8.16.0/22 and 10.8.31.0/21, which of the following is the BEST summarized CIDR notation?

A. 10.8.0.0/16
B. 10.8.0.0/19
C. 10.8.0.0/20
D. 10.0.0.0/24

A

A. 10.8.0.0/16

48
Q

A technician discovers that multiple switches require a major update. Which of the following policies should be followed?

A. Change management policy
B. Remote access policy
C. Acceptable use policy
D. Memorandum of understanding

A

A. Change management policy

49
Q

A technician is troubleshooting a point-to-point fiber-optic connection. The technician is at a remote site and has no connectivity to the main site. The technician confirms the switch and the send-and-receive light levels are within acceptable range. Both fiber SFPs are confirmed as working. Which of the following should the technician use to reveal the location of the fault?

A. OTDR
B. Light meter
C. Tone generator
D. CSU/DSU

A

A. OTDR

50
Q

A Chief Information Officer (CIO) wants to move some IT services to a cloud service offering. However, the network administrator still wants to be able to control some parts of the cloud service’s networking components. Which of the following should be leveraged to complete this task?

A. IaaS
B. PaaS
C. SaaS
D. DaaS

A

B. PaaS

51
Q

A technician is investigating the cause of a network outage. Which of the following documents should be checked to rule out configuration issues?

A. Change management records
B. Inventory management
C. Network log files
D. Logical diagrams

A

A. Change management records

52
Q

junior network technician receives a help desk ticket from an end user who is having trouble accessing a web application that was working the previous day. After talking with the end user and gathering information about the issue, which of the following would be the most likely course of action for the technician to perform NEXT?

A. Establish a theory of probable cause.
B. Escalate the ticket to a senior technician.
C. Implement the solution.
D. Document the findings and outcomes.

A

A. Establish a theory of probable cause.

53
Q

A network technician at a small office upgrades the LAN switch. After the upgrade, a user reports being unable to access network resources. When the technician checks the switchport, the LED light is not lit. Which of the following should the technician check FIRST?

A. The device is using the correct cable type.
B. The switchport is functioning properly.
C. The device is connected to the switch.
D. The switch is connected to the router.

A

C. The device is connected to the switch.

54
Q

A network administrator wants to employ a username and password authentication system for guest WiFi. Which of the following is the BEST option to provide this type of authentication?

A. Port security
B. MAC filtering
C. Network access control
D. Captive portal

A

D. Captive portal

55
Q

A technician is responsible for configuring a new firewall. The hardware team has already installed, powered, and connected the system. Which of the following types of documentation should the technician utilize to complete the task?

A. Rack diagram
B. IDF/MDF documentation
C. Network performance baseline
D. Logical and physical diagrams

A

D. Logical and physical diagrams

56
Q

Which of the following storage network technologies inherently leverages block-level storage?

A. NAS
B. SAN
C. FCoE
D. iSCSI
E. FTP
A

A. NAS

57
Q

Which of the following networking devices operates at Layer1?

A. Router
B. Firewall
C. Hub
D. Bridge

A

C. Hub

58
Q

A disgruntled employee decides to leak critical information about a company’s new product. The employee places keyloggers on the department’s computers, allowing the information to be sent out to the Internet. Which of the following attacks is occurring?

A. Man-in-the-middle
B. Logic bomb
C. Insider threat
D. Social engineering

A

C. Insider threat

59
Q

A network technician needs to set up an access method for Ann, a manager, to work from home. Ann needs to locally mapped corporate resources to perform her job. Which of the following would provide secure access to the corporate resources?

A. Utilize an SSH connection to the corporate server.
B. Use TFTP to transfer files to corporate resources.
C. Allow RDP through an external firewall.
D. Connect utilizing client-to-site VPN.

A

D. Connect utilizing client-to-site VPN.

60
Q

Which of the following DNS record types is an alias?

A. CNAME
B. PTR
C. NS
D. SRV

A

A. CNAME

61
Q

A recently constructed building makes use of glass and natural light. Users in the building are reporting poor cellular connectivity and speeds. Which of the following is MOST likely the cause?

A. Absorption
B. Channel overlap
C. Reflection
D. Frequency mismatch

A

C. Reflection

62
Q

A company technician has set up the network so that all external protections and internal protections across the network are segregated from any malicious attacks and there are firewalls configured on both sides of the DMZ. During the configuration review of the
device installation, there is evidence of unauthorized network traffic penetrating the internal network.
Which of the following is either missing or incorrectly configured in the firewall settings?

A. Stateful settings
B. UTM
C. ACL
D. Implicit deny
E. Stateless settings
A

A. Stateful settings

Explanation/Reference:
https://technet.microsoft.com/en-us/library/cc700820.aspx

63
Q

Users report they are receiving an unusual amount of suspicious email from the network administrator.
Which of the following is the cause of this security issue?

A. Ping of death
B. DDoS attack
C. Jamming
D. Malware

A

D. Malware

64
Q

A network technician has been asked to add a user to an administrative group on the network.
Which of the following change management procedures should be followed?

A. Network configuration
B. Potential impact analysis
C. Rollback process
D. Approval process

A

D. Approval process

65
Q

Which of the following is an advantage of utilizing a Layer 2 switch rather than a hub?

A. A switch avoids broadcast storms
B. A switch detects frame collisions
C. A switch increases broadcast domains
D. A switch increases collision domains

A

B. A switch detects frame collisions

Explanation/Reference:
http://www.ebay.com/gds/Network-Switches-vs-Hubs-Advantages-and-Disadvantages-/10000000177330010/g.html

66
Q

A technician has deployed a new VPN concentrator. The device needs to authenticate users based on a backend directory service.
Which of the following services could be run on the VPN concentrator to perform this authentication?

A. Kerberos
B. RADIUS
C. GRE
D. IPsec

A

B. RADIUS

Explanation/Reference:
https://security.stackexchange.com/questions/130095/what-is-the-difference-between-a-radius-server-and-active-directory

67
Q

A network administrator at a large campus has determined that many connectivity issues reported in the residence halls are due to residents connecting the LAN side of personal routers to the campus network.
Which of the following can be implemented to resolve this problem?

A. Loop protection
B. Disable the default VLAN
C. DHCP snooping
D. Disabling multicast

A

C. DHCP snooping

68
Q

In a home network, all clients are accessing the Internet via a single host.
This is an example of which of the following?

A. Point-to-multipoint
B. Peer-to-peer
C. Partial mesh
D. Hybrid

A

A. Point-to-multipoint

69
Q

A PC is having trouble connecting to a remote resource.
Which of the following will identify the routers a packet travels through and provide real-time feedback regarding latency?

A. tracert
B. NETBIOS
C. ipconfig
D. nslookup
E. ping
A

A. tracert

70
Q

A company is building a new 10Gb Ethernet top of rack network.
Which of the following media is MOST cost-effective for this implementation?

A. CAT5e
B. Multimode fiber
C. Single mode fiber
D. Fibre channel

A

B. Multimode fiber

Explanation/Reference:
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/white_paper_c11-522337.html

71
Q

When setting up a virtual machine, which of the following is an advantage of a virtual NIC as compared to a hardware NIC?

A. A virtual NIC does not require a dedicated slot.
B. A virtual NIC does not have to be assigned an IP address.
C. A virtual NIC is backwards compatible to work with IPv4.
D. A virtual NIC exceeds the IP port limits.

A

A. A virtual NIC does not require a dedicated slot.

72
Q

A company would like to offer free wireless Internet to visiting customers without compromising security on their internal network.
Which of the following firewall rules should a technician configure to accomplish this?

A. Block all LAN to LAN traffic
B. Block all LAN to WLAN traffic
C. Block all WAN to LAN traffic
D. Block all WLAN to LAN traffic

A

D. Block all WLAN to LAN traffic

Explanation/Reference:
http://searchsecurity.techtarget.com/WLAN-security-Best-practices-for-wireless-network-security

73
Q

A company is moving into a larger office space. A site survey is performed, a network layout is created, and access points are placed throughout the building.
Which of the following steps should the network technician take NEXT to ensure blanket wireless coverage?

A. Create a heat map and adjust access points.
B. Broadcast the SSID to connect all devices.
C. Replace all antennas with omni-directional types.
D. Configure 5GHz dual channel broadcasting.

A

B. Broadcast the SSID to connect all devices.

74
Q

Which of the following would BEST mitigate the risk of social engineering?

A. Man traps
B. Business continuity planning
C. End-user training
D. Penetration testing

A

C. End-user training

75
Q

Which of the following is an effect of the protocol mechanism QoS with reference to unified communication?

A. QoS ensures that unified communication video service is delivered as high definition between the unified communication endpoints.
B. QoS enables the unified communication traffic compression algorithm to conserve bandwidth across the WAN.
C. QoS ensures that real time traffic is not delayed between unified communication endpoints.
D. QoS prevents any degradation in the voice/video signal quality by tunneling the packets between the unified communication endpoints.

A

C. QoS ensures that real time traffic is not delayed between unified communication endpoints.

76
Q

A network technician is troubleshooting a WAN link that traverses a 100-foot span of RG6. The technician utilizes a Time Domain Reflectometer (TDR) to proof the cable during the troubleshooting process. The TDR returns a trace that drops off suddenly at 51
feet (15.54 meters).
Which of the following is this indicative of?

A. Open
B. TX/RX reverse
C. Short
D. Crosstalk

A

A. Open

77
Q

Which of the following WAN technologies decreases bandwidth performance as the distance from the provider increases?

A. DSL
B. T1
C. Frame relay
D. ISDN

A

A. DSL

Explanation/Reference:
https://www.lifewire.com/speed-of-dsl-internet-service-817523

78
Q

Which of the following allows for spatial reuse utilizing several multipath distortions as RF data streams?

A. Omni-directional
B. MIMO
C. Distributed
D. Beam forming

A

B. MIMO

Explanation/Reference:
https://en.wikipedia.org/wiki/MIMO

79
Q

Which of the following areas MUST all other OSPF areas connect to in a properly configured network?

A. 0
B. 1
C. 110
D. 255

A

A. 0

Explanation/Reference:
http://www.certiology.com/computing/computer-networking/ospf-area-types.html

80
Q

A network technician needs to implement an Ethernet network in a factory environment. Existing shielded twisted pair wiring does not provide enough protection from the interference of the factory equipment.
Which of the following copper wired Ethernet networks should be used?

A. 10Base2
B. 100BaseFX
C. 100BaseT
D. 10GBaseSR

A

C. 100BaseT

Explanation/Reference:
https://en.wikipedia.org/wiki/Fast_Ethernet

CompTIA Network + ET (7 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions