Test 1 Flashcards

1
Q

After uncoupling, the power line should be

A

upside down to prevent water from getting inside

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

If you are backing up your tractor under a trailer

A

the trailer should lift up slightly when you are backing underneath it

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is the purpose of the emergency line

A

it controls the emergency brakes on a combo vehicle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is the proper procedure for backing under a trailer

A

in the lowest reverse gear

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

The following applies to the air valves if you are testing the trailer spring and parking brakes

A

the service and parking brake should be off, trailer supply out, and the trolley released

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

When testing the trailer protection valve it should

A

pop out and go from normal to emergency

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

A jackknife situation is more likely to occur

A

when the trailer is empty

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

If the fifth wheel locking lever does not engage around the king pin

A

it is not properly connected and should be corrected before driving off

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

The emergency line is

A

red

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the proper procedure for checking the trailer connection?

A

slowly move forward and then inspect the coupling

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

The hand valve should be used when parking in the following situation

A

never - the hand or trolley valve is designed to test the brakes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

The following can help prevent a rollover:

A

make sure the load is properly secured and by reducing speed around turns

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is the proper procedure should your vehicle become stuck on the railroad tracks

A

leave the vehicle immediately and notify 911 or the emergency number posted near the tracks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Using the trailer brakes to straighten it out

A

should not be done since it was usually caused by the trailer brakes - locking up the trailer braes can cause the vehicle to skid

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

How do you supply air to the trailer tanks

A

push in the trailer supply valve

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

The locking jaws should lock around the kingpin

17
Q

If the emergency air line to the trailer loses pressure it will

A

activate the trailer’s emergency brakes

18
Q

The trailer’s air tanks are supplied by

A

opening the trailer’s supply valve

19
Q

If you are backing your tractor under a trailer, the following should occur:

A

the trailer should rise off the ground slightly

20
Q

After pushing in the trailer air supply valve you should not drive off until the pressure reaches

A

between 90 and 120 psi

21
Q

During an inspection of a tractor and trailer, the ______ should be properly secure and free from damage or leaks?

A

the glad hands

22
Q

What color is the service line

23
Q

You should always do the following before uncoupling a trailer:

A

make sure the surface is level and capable of supporting the weight of the trailer

24
Q

In relation to a bus a straight truck, combo vehicles have

A

more things to inspect

25
Q

The following is the correct procedure for testing the trailer brakes

A

release the service and parking brake, open the trailer air supply, and then apply the trolley brake

26
Q

When should you use the trailer hand brake when driving?

A

it should not be used when you are driving

27
Q

When completing coupling the fifth wheel safety catch on the fifth wheel locking lever will be

A

over the locking lever