Tell me questions Flashcards
how you would check that the brakes are working before starting a journey
brakes should not feel spongy or slack. brakes should be tested when setting off. vehicle should not pull to one side
where would you find the information for the recommended tyre pressures for this car and how tyre pressures should be checked
In the manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when the tyres are cold, don’t forget a spare tyre, remember to refit valve caps
how to make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash
the head restraint should be adjusted so the rigid part of it is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable
how would you check the tyres to ensure they have sufficient tread depth and that their general condition is safe to use on the road
No cuts and bulges, 1.6mm of tread depth across the central 3/4 of the breadth of the tyre and around the entire outer circumference
how would you check that the headlights and tail lights are working
operate switch or turn on ignition if necessary then walk around the vehicle
how would you know if there was a problem with your anti lock braking system
The warning light should illuminate if there is a fault with the anti lock braking system
how would you check the direction indicators are working
Operate switch (turn on ignition if necessary), then walk round vehicle.
Tell me how you would check the brake lights are working on this car
Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help.
Tell me how you would check the power assisted steering is working before starting a journey.
If the steering becomes heavy, the system may not be working properly. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate.
Tell me how you would switch on the rear fog lights) and explain when you would use it/them,
Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on.
Tell me how you switch your headlight from dipped to main beam and explain how you would know the main beam is on.
Operate switch, check with main beam warning light.
Open the bonnet and tell me how you would check that the engine has sufficient oil.
Identify dipstick / oil level indicator, describe check of oil level against the minimum/ maximum markers
Open the bonnet and tell me how you would check that the engine has sufficient engine coolant.
Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.
Open the bonnet and tell me how you would check that you have a safe level of hydraulic brake fluid.
Identify reservoir, check level against high/low markings.
