Tell Me Questions Flashcards

You may prefer our related Brainscape-certified flashcards:
1
Q

Tell me how you would check that the breaks are working before starting a long journey

A

Breaks should not feel spongey or slack. Breaks should be tested as you set off. Vehicle should not pull to one side.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Tell me where you’d find the information for the recommended tyre pressure for this car and how tyre pressures should be checked.

A

Manufacturers guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyres, remember to refer valve caps.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Tell me how you would make sure the head restraint is correctly adjusted so it provides the best protection in the event of a crash.

A

The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eyes or top of the ears. And as close to the back of the head as is comfortable. Note: some restraints may not be adjustable.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Tell me how you would check the tires to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.

A

No cuts and bulges 1.6mm of tread depth across the cental three quarters of the breadth of the tyre, and around the entire outer circumference of the tyre.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Tell me how you would check that the headlights and taillights are working you don’t need to exit the vehicle.

A

Explain you’d operate the switch (turn on ignition if necessary), then walk around the vehicle (as this is a tell me question you don’t have to exit the vehicle).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Tell me how you’d know if there was a problem with the anti lock breaking system.

A

Warning light should illuminate if there is a fault with the anti lock breaking system.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Tell me how you’d check the direction indicators are working. You don’t need to exit the vehicle.

A

Explain that you’d operate the switch, then walk around the vehicle .

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Tell me how you’d check the break lights are working on this vehicle.

A

Explain that you’d operate the break pedal, make use of reflections in windows or doors, or ask someone to help.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Tell me how you’d check the power assisted steering is working before starting a journey.

A

If the steering becomes heavy, the system may not be working properly. Before starting a journey 2 checks can be made.
Gentle pressure on the steering wheel maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Tell me how to switch the rear fog light on and now to use them

A

Operate the switch and check the rear fog warning light

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Tell me how to switch headlights from dipped to main beam explain how you would know that main beam is on

A

Operate the switch and check for warning light

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Open the bonnet and tell me how you would check engine oil is at the correct level

A

Dipstick will display a minimum and maximum level of oil it should be at maximum

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Open the bonnet and tell me how the level of engine coolant is determined

A

High and low level markings describe how to fill to the correct level

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Open the bonnet and tell me how you would determine that hydraulic break fluid level is at the correct level

A

Check high and low level it should not exceed the high marker

How well did you know this?
1
Not at all
2
3
4
5
Perfectly