tell me Flashcards
tell me how you would check that the brakes are working before starting a journey
brakes should not feel spongy or slack.
brakes should be tested as you set off.
vehicle should not pull to one side
tell me where youd find the information for the recommended tyre pressure for this car and how tyre pressure should be checked
manufactures guide, use a reliable pressure gauge, check and adjust pressure when tyres are cold, don't forget spare tyre, remember to refit valve caps
tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash
should be adjusted so the rigid part of the restraint is at least as high as the eye or top of the ears
close to the back of the head as comfortable
some restraints might not be adjustable
tell me how youd check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road
no cuts and bulges
1.6mm of tread depth across the central 3/4 of the breadth of the tyre and around entire circumference of tyre
tell me how youd check that the headlights and tail lights are working
operate the switch then walk round the car
tell me how youd know if there was a problem with your anti lock braking system
warning light should illuminate if there is a fault
tell me how youd check the direction indicators are working
operate the switch then walk round the car
tell me how youd check the brake lights are working on this car
operate the brake pedal
use reflections in windows or ask someone to help
tell me how youd check the power assisted steering is working before starting a journey
if steering is heavy it may not be working
gentle pressure while engine is started should result in slight but noticeable movement
turn the steering wheel just after moving will give indication it is working
tell me how youd switch on the rear fog lights and explain how youd use them
operate switch and use when visability is reduced to less than 100m
tell me how youd switch your headlights from dipped to main beam and explain how youd know the main beam is on
operate switch a blue light will show if main beam is on
open the bonnet and tell me how youd check the engine has sufficient oil
identify dipstick wipe it reinsert then check its between min and max
open the bonnet and tell me how youd check that the engine has sufficient engine coolant
identify high and low markings on tank fill between them
open the bonnet and tell me how youd check that you have a safe level of hydraulic brake fluid
identify reservoir check against high low markings