Tell me Flashcards
How would you check that the brakes are working before starting a journey?
Explain that: when you push down on the brake pedal, it should not feel spongy or slack. Brakes should be tested as you set off. The vehicle should not pull to one side when you use the brakes
Where would you find the information for the recommended tyre pressures for this car and how tyre pressures should be checked?
Explain that: you’d refer to the manufacture’s guide. Use a reliable pressure gauge. Check and adjust pressures when tyres are cold. Don’t forget the spare tyre! Remember to refit valve caps after checking
How would you make sure your head resistant is correctly adjusted so it provides the best protection in the event of a crash?
Adjust so that the rigid part of the head resistant is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable - demonstrate as you explain
How would you check the tyres to ensures that they have sufficient tread depth and that their general condition is safe to use on the road?
Explain that: tyres should have no cuts or bulges. There should be 1.6mm of tread depth across the central three-quarters of the breadth of the tyre, and around the entire outer circumference of the tyre
How would you check the headlights and tail lights are working. (Don’t need to exit the vehicle)?
Explain that: you’d operate the switch (after turning on the ignition if necessary), then walk round the vehicle to check the lights
How would you know there was a problem with your anti-lock braking system (ABS)?
Explain that: a warning light should illuminate if there is a fault with the anti-lock braking system
How would you check the direction indicators are working. (Don’t need to exit the vehicle)?
Explain that: you’d operate the indicator switch (after turning on the ignition if necessary) or turn on the hazard warning lights, then walk round the vehicle to check the lights
How would you check the brake lights are working on this car?
Explain that: you’d operate the brake pedal, make use of reflections in windows or doors, or ask someone to help
How would you check the power-assisted steering is working before starting the journey?
Explain that: if the steering becomes heavy, the system may not be working properly. Before starting a journey; maintaining gentle pressure on the steering wheel while the engine is started should result in a slight but noticeable movement as the system begins to operate; alternatively, turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning
How would you switch on the rear fog light(s) and explain when you’d use it/them. (Don’t need to exit the vehicle)?
Explain that: you’d operate the switch (after turning on dipped headlights if necessary) and check the instrument warning light comes on. Explain when fog lights should be used
How would you switch your headlight from dipped to main beam and explain how you’d know the main beam is on?
Explain that: to operate the switch (ignition or engine on if necessary) and check that the main beam warning light comes on. If safe, you can demonstrate as you explain - remember to switch off the headlights when no longer needed
