tell me Flashcards

You may prefer our related Brainscape-certified flashcards:
1
Q

TELL ME HOW YOUD CHECK THAT THE BREAKS ARE WORKING BEFORE STARTING A JOURNEY

A

Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

TELL ME WHERE YOU WOULD FIND THE INFO FOR THE RECOMMENTED TYRE PRESSURES FOR THIS CAR AND HOW TYRE Pressures should be checked

A

Manufacturers guide, using a reliable pressure gauge, check and adjust pressures when the tyres are cold, remember to refit valve caps

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

TELL ME HOW YOU MAKE SURE YOUR HEAD RESTRAINT IS CORRECTLY ADJUSTED SO IT PROVIDES THE BEST PROTECTION IN THE EVENT OF A CRASH

A

the head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or the top of the ears and as close to the back of the head as is comfortable

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

TELL ME HOW YOUD CHECK THE TYRES TO ENSURE THAT THEY HAVE SUFFICIENT TREAD DEPTH AND THat their GENERAL CONDITION IS SAFE TO USE ON THE ROAD

A

No cuts and bulges, 1.6mm of tread depth across the central three quarters of the breadth of the tyre, and around the entire outer circumference of the tyre

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

tell me how you’d check that the headlights and the tail lights are working. You don’t need to exist the vehivle

A

operate the switch (turn on ignition if needed), then walk round vehicle (dont need to acc do this)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Tell me how you’d know if there was a problem with your anti-lock braking system

A

Warning light should illuminate if there was a fault

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

tell me how youd check the direction indicators are working. you dont need to exit the vehicle

A

explain you would operate the switch (turn on ignition if necessary) and then walk around the vehicle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

tell me how you’d check the brake lights are working on this car

A

you’d operate the brake pedal, make use of reflection in windows or doors, or ask someone to help you

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

tell me how youd check the power-assisted steering is working before starting a journey

A

If the steering becomes heavy, the system may not be working properly. Before starting a journey, 2 simple checks can be made.

Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

tell me how you’d switch on the rear fog light(s) and explain when you’d use it/them. You don’t need to exit the vehicle.

A

Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.

USE WHEN VISIBILITY IS BELOW 100METRES

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q
  1. Tell me how you switch your headlight from dipped to main beam and explain how you’d know the main beam is on.
A

Operate switch (with ignition or engine on if necessary), check with main beam warning light.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Open the bonnet and tell me how you’d check that the engine has sufficient oil.

A

Identify dipstick/oil level indicator, describe check of oil level against the minimum and maximum markers.

BLACK CAP. GET ORANGE DIPSTICK. PUT IN TAKE OUT AND WIPE IT, there is a min and max

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Open the bonnet and tell me how you’d check that the engine has sufficient engine coolant.

A

Identify high and low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.

WHITE cap BOTTLE ON RIGHT SIDE KINDA HIDDEN. has min max markings on side of bottle. Fill up to appropriate setting when it is cool.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Open the bonnet and tell me how you’d check that you have a safe level of hydraulic brake fluid.

A

Identify reservoir, check level against high and low markings.

WHITE BOTTLE GREY CAP KINDA FAT. HAS MIN MAX ON THE SIDE OF BOTTLE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly