TB067 Holmatro Rescue Tool

Question 1

TB067 Holmatro Rescue Tool

Power Unit

Answer 1

2 types
4 cycle
Air cooled Honda engines
Positive displacement pump used to draw and pressurize hydraulic fluid

Question 2

TB067 Holmatro Rescue Tool

Power Unit 2 stage pump

Answer 2

Initially 3,000 psi
Second stage “kicks in” at 10,500 psi
Momentary “stalling” before “changing over” into second stage

Question 3

TB067 Holmatro Rescue Tool
Power Unit
Hydraulic Fluid type

Answer 3

22 weight mineral based hydraulic fluid
Pale or yellow in color
Non corrosive
Life blood of system

Question 4

TB067 Holmatro Rescue Tool

PPU15

Answer 4

35lbs
2.5 hp honda engine
4500 rpm(set at factory)
1.3 qts regular unleaded gasoline
2000cc useable hydraulic fluid
Single tool

Question 5

TB067 Holmatro Rescue Tool

DPU30

Answer 5

58 lbs
3 hp honda engine
3600 rpm
1.5 qts regular unleaded gasoline 
3000cc hydraulic fluid
Dual pump for simultaneous tool use

Question 6

TB067 Holmatro Rescue Tool

Spreaders

Answer 6

Model 3260 UL
Deadman clockwise=open
Counter clockwise=close
Built in check valve keeps tool in current position while under a load

Question 7

TB067 Holmatro Rescue Tool
Spreaders
Chain Pulling Tips

Answer 7

Grab hooks to be used with C-8 chains

Question 8

TB067 Holmatro Rescue Tool
Spreaders
Cutter Tips

Answer 8

Used for panel cutting

Panel vans, aircraft skins, semi trailers

Question 9

TB067 Holmatro Rescue Tool

Cutters

Answer 9

Deadman
Clockwise=open
CCW=close
*blades DO NOT cross over or twist=damage

Question 10

TB067 Holmatro Rescue Tool

3020UL

Answer 10

63,400lbs cutting force
5 1/4” opening
27 1/2 lbs

Question 11

TB067 Holmatro Rescue Tool

3035 NCT

Answer 11

57,320 lbs cutting force
5 5/8” opening
33 1/2 lbs

Question 12

TB067 Holmatro Rescue Tool

4050 NCT

Answer 12

208,000 lbs cutting force
7 1/8” opening
37 1/2 lbs

Question 13

TB067 Holmatro Rescue Tool

Telescopic Rams

Answer 13

Deadman
CW=extend
CCW=retract
Two stage=plunger within a plunger
Extends from nearest handle

Question 14

TB067 Holmatro Rescue Tool
Telescopic Rams
3340

Answer 14

12” retracted to 23” fully extended
49,210lbs force first stage, 18,210lbs second stage
24lbs

Question 15

TB067 Holmatro Rescue Tool
Telescopic Rams
3350

Answer 15

21” to 50 1/4”
49,210lbs force 1st stage, 18,210lbs second stage
37 lbs

Question 16

TB067 Holmatro Rescue Tool

HRS22

Answer 16

Provides purchase point nearer to object pushed in

Helps spread the force load against an object=gives ram end a wider and more stable purchase point

Question 17

TB067 Holmatro Rescue Tool

Hoses

Answer 17

Orange and blue
32’
Inner and outer hoses made of polyurethane and reinforced with Kevlar-like Aramid fibers=resist kinking
Bend restrictor at ends where hose and fitting meet
Working pressure of 10,500psi
Burst tested at 42,000psi

Question 18

TB067 Holmatro Rescue Tool

Couplers

Answer 18

flat faced, no drip, auto locking, quick couplers
automatic return valve 
Each coupler(male and female) have protective cap

Question 19

TB067 Holmatro Rescue Tool

Pressure Relief Device

Answer 19

relieves built up pressure in the hoses and tools
M fitting
Turn clockwise

Question 20

TB067 Holmatro Rescue Tool

Store tools to avoid inadvertent build up of pressure

Answer 20

Spreader= close until tips touch, then open 1/4” inch
Cutters=open/close until tips cross
if it doesnt fit in compartment, open completely then close slightly
Rams=fully retract, the open 1/4”

Question 21

TB067 Holmatro Rescue Tool

Secunet

Answer 21

bonnet style

air bag restraint device

Question 22

TB067 Holmatro Rescue Tool
Power Unit
Maintenance and Periodic Checks

Answer 22

DAILY-fuel and hydraulic levels, On position, Choke in proper position, fuel valve on, visual inspection
WEEKLY-engine oil and fluids checked, visually check fasteners, run for at least 15min to ensure a smooth operation, check 2nd stage pump is operating
MONTHLY-air filter for cleanliness, proper operation of hose couplings, dust caps and their tethers and starter cord for fraying. condition of fuel

Question 23

TB067 Holmatro Rescue Tool
Spreaders
Maintenance and Periodic Checks

Answer 23

DAILY-ready for use and dust cap in place
WEEKLY- good overall visual inspection; trigger handle operates freely and returns to neutral position when released; cycled at least one time and inspected for leaks and debris near the yoke area
MONTHLY-cracks or gouges in arms and cracks or deformities in the main body; check spring loaded quick pins

Question 24

TB067 Holmatro Rescue Tool
Cutters
Maintenance and Period Checks

Answer 24

DAILY-readiness and dust cap in place
WEEKLY-good visual inspection; trigger handle operates correctly; cycled at least one time; hinge bolt nut tightness to 75lbs of torque; blades for nicks, cracks and gouges;
“Mushrooming” dressed with a file
MONTHLY-visual inspection of the main body of the tool

Question 25

TB067 Holmatro Rescue Tool Telescopic Rams Maintenance and Periodic Checks

Answer 25

DAILY-rams readiness and dust caps in place WEEKLY-visual inspection of carrying handle; rams ends should turn freely and swivel completely around; trigger handle MONTHLY-extend the rams; gouges or sharp points; leakage; small chrome tube(return tube)

Question 26

TB067 Holmatro Rescue Tool Hoses Maintenance and Periodic Checks

Answer 26

DAILY-visual inspection of dust caps and no fluid leaks WEEKLY- coupler for proper operation by connecting to hand tool; full connection with "click" with slight rotation; if not, WD40 to area behind coupler and to the face; inspected for cracks, holes, abrasions; have tool fully open for 5-10 sec for leaks Leaking hose taken out of service immediately and replaced by shops Clean hose with mild soap and warm water; WD40 for grease, tar battery acid and couplers Stored coiled roll; not in handle

Question 27

TB067 Holmatro Rescue Tool Accessories Maintenance and Periodic Checks

Answer 27

MONTHLY- HRS22 Ram Support, cutting tips, chain shackles and chains SHALL be inspected for cracks, wear or any other damage Secunet- inspected for cracks, wear or any other damage; one time deployment

Question 28

TB067 Holmatro Rescue Tool | Fuel Maintenance

Answer 28

CA EPA approved engines; Small air ports that are susceptible to clogging and gumming with contaminated or "sour" gasoline Replace feul every 30 days with fresh fuel Sta-bil or Seafoam keep gas fresh