TB 131 - Holmatro Tool

Question 1

According to TB 131 - rescue holmatro tool which way do you rotate the handle in order to open the jaws?

Answer 1

When facing the rear of the tool, rotate handle to the right to open

Question 2

According to TB 131 - rescue holmatro tool

The tool has a max spreed of how far?

Answer 2

10 1/2 inches

Question 3

According to TB 131 - rescue holmatro tool

The tool has a max spreading force of what at the tips?

What is the max along the arm?

Answer 3

11,690

35,970

Question 4

According to TB 131 - rescue holmatro tool

The tool has a max cutting of what ?

Answer 4

49,000

Question 5

According to TB 131 - rescue holmatro tool

What is the weight of the tool?

Answer 5

33 lbs

Question 6

According to TB 131 - rescue holmatro tool

What is the operating psi of the tool?

Answer 6

10,500 psi

Question 7

According to TB 131 - rescue holmatro tool

While using tool once turned on, if the control handle is not operated within 3 seconds the motor will slow to idle.

If the tool is not used within _____the unit will shut off.

Answer 7

30 seconds

Question 8

According to TB 131 - rescue holmatro tool

When finished with the tool, close the tips to within _____from each other.

Answer 8

1/4 inch

Question 9

According to TB 131 - rescue holmatro tool

The tools batteries should last over 2 years with a cycle life of ____to_____charges.

Answer 9

400 - 500 cycles

Question 10

According to TB 131 - rescue holmatro tool

During a weekly check you notice that the pivot bolt nut is in need of tightening.

Tighten to how many lbs of torque?

Answer 10

75 lbs

Question 11

According to TB 131 - rescue holmatro tool