Tanker Incriment Flashcards
What is the height of the tanker?
2.96m
What is the gross operational mass?
10.58T
What is the GVM?
10.7T
What is the length of the vehicle?
7.09m
What is the width of the tanker? Body?
2.36m
What is the width of the tanker mirror to mirror?
2.96m
How may crew protection sprays are on the tanker?
25
What pump pressure is required to activate the crew protection sprays?
350-400kpa. Pump contains a pressure reduction valve to ensure protection spray system is not emptied ultra fast
How long does the crew protection last?
5 minutes. Operate at 130lpm giving the 650 litre crew protection water 5 minute operating time
What is contained in the near side first locker?
2 x BA sets 2 x BA cylinders 2 x Torches 2 x Splash Suits P2 Masks
What is contained in the near side second locker?
Small gear
- hose bandages
- washers
- branches x 2 (115-475lpm protek & 50-230lpm protek)
- live reel rewind handle
- dead reel rewind handle
- coupling, matching pieces & adaptors
- low expansion foam branch
- medium expansion foam branch
- 3 x 64mm lengths
- 3 x 38mm lengths
- defib
- first aid kit
- ration packs
- foam handling kit
- hazardous tree kit
- torch kit
- ear plugs and p2 masks
Friction Loss:
Double the _______, __________ the friction loss
length, double
Friction Loss:
_____________ the diameter, ___________ the friction loss, ___________ the flow
double, quarter, quadruple
Friction Loss:
______ the velocity, __________ the friction loss
halve, quarter
Friction Loss:
Friction loss will ________ with the ___________ of the internal surface
increase, roughness
Friction Loss:
Friction loss is _______________ of pressure
independent
Pressure is _________________ on any surface on which it acts
perpendicular
Pressure at any point of a fluid at ______ is the same _________ in all directions
rest, intensity
Pressure applied from outside to a fluid contained within a vessel is transmitted _________ in all _________
equally, directions
Downward pressure of a fluid is proportional to its _________
depth
Downward pressure of a fluid in an open vessel is proportional to the _________ of the fluid
density
Downward pressure of a fluid on the bottom of the vessel in independent of the ____________ of the vessel
shape
Advantages of a centrifugal pump are (4 answers)
- Constant flow of water
- Able to pump water containing small amounts of solids
- May be joined in series or parallel
- Flow can be interrupted without stopping engine
Disadvantages of centrifugal pump
cannot pump air, vapours or gas