T3 Flight Controls Flashcards
How will the rotor discs react to a right pedal input?
FWD Swashplate Right Aft Swashplate Left
How will the rotor discs react to a right cyclic input?
Both Swashplates Right
How is the collective pitch in the forward and aft rotors affected when the cyclic is moved forward?
Decreases thrust in the FWD system and increases thrust in the AFT system.
What control movements must be made for a hovering turn about: Center Hook, Forward Hook, Aft Hook
Pedal turn, Pedal and Cyclic Opposite, Pedal and Cyclic Same
How must the flight controls be positioned prior to removel of hydraulic pressure?
Neutral Ground
Give names for the following abbreviations: DAFCS, DASH, ILCA, CCDA, LVDT, CPT
Digital Advanced Flight Control System, Differential Airspeed Hold, Intrigated Lower Control Actuator, Cockpit Control Driver Actuator, Linear Varibale Differential Transducer, Control Position Transducer
Which aircraft system causes the extensible link portion of the ILCA to make control inputs?
AFCS
What is the minimum allowable forward and aft cyclic stick travel during the controls check?
7 FWD 4.5 AFT
What are the control limitations for ground operations: Thrust, Lateral Cyclic, Aft Cyclic, Pedals
Ground Detent, 1 in, 2, .75 in
Should you enter forcasted moderate or stronger turbulance with an inoperative thrust brake?
No
What envirnomental flight condition shall be avoided when the thrust brake is inoperative?
Forcasted turbulance
Which control axes have magnetic brakes that are released when the centering device release swith is pressed?
Yaw, Pitch, Roll
Why is it important to have the left and right pedals adjusted to the same holes prior to engine start?
To prevent droop stop pounding
What are the functions of the boost position of the ILCA?
Provides hydraulic assist to move the flight controls and prevent feedback from external forces
What is the function of the DACFS extensible link portion of the ILCA?
Allows AFCS to makes inputs