Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Process Guide Notes > SWE Questions > Flashcards

SWE Questions Flashcards

1
Q

___________ shall ensure that an effective calibration program
is implemented for assigned equipment and tooling.

A

Commanding Officer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

___________ provides the minimum mandatory requirements for the unit’s Corrosion
Control Plan.

A

The Corrosion Control Program Process

Guide, CGTO PG-85-00-60,

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

___________ will oversee the Coast Guard aviation

TEMPEST program.

A

Commandant (CG-41)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

____________will provide Commandant (CG-41) with

National, Department of Homeland Security, and Coast Guard TEMPEST policy.

A

Commandant (CG-61)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

NO REPAIRS SHALL BE MADE TO COMPOSITE STRUCTURES
BY ANY UNIT UNLESS THEY MEET ALL SAFETY
REQUIREMENTS LISTED IN

A

AFTO 1-1-690.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

PERSONNEL
WORKING WITH THESE MATERIELS ARE REQUIRED TO BE
ENROLLED IN THE OCCUPATIONAL MEDICAL MONITORING
PROGRAM. THE SAFETY AND ENVIRONMENTAL HEALTH
MANUAL,

A

COMDTINST M5100.47 (SERIES) APPLIES.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

AVGAS free eng manuals.

A

Maintenance Instructions, Aircraft Fuel Cells and Tanks, NAVAIR 01-1A-35
Chapter 6, Safety and Environmental Health Manual, COMDTINST M5100.47 (series)
Inspection and Repair of Aircraft Integral Tanks and Fuel Cells, AFTO 1-1-3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

AVGFET certification is valid for _________.

A

One Year

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Technical Airworthiness Assurance Process Guide

A

CGTO PG-85-00-190.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Nickel-cadmium battery shops will be mechanically ventilated to provide _______________ per hour in order to ensure the removal of any hydrogen gas
generated as a result of charging.

A

three to

four air changes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Burrs, Chips, and Metal Cuttings Brushes ______ be used to remove burrs, chips, and
metal cuttings from machines, work tables, stands, and floors.

A

shall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Aviation Survival Shop shall maintain gaseous

oxygen servicing equipment IAW

A

Chapter 5 of the Aviation Life Support Manual,

COMDTINST M13520.1 (series), and ACMS MSR MPC 256141.0.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Where water
wash facilities are provided for small booths, they will have a minimum of _________ linear air velocity across the face of the booth.

A

200 feet per

minute

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Covered metal cans ______ be provided for disposal of rags,

waste, and other materiels saturated with paint or flammable chemicals. These cans will be emptied ______.

A

shall , daily

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Containers

of not more than _________ capacity will be used for storing paints and dopes.

A

5 gallon

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

______________ hand tools shall not be used near
flammable or explosive type materiels unless they are approved as being explosion
proof.

A

Electric powered

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

All electric power tools, switches, junction boxes,
and regulators will be positioned at least ________ above the floor level in hangars
which house fueled aircraft.

A

18 inches

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

The use of compressed air for blowing dirt from

hands, face, or clothing is _________.

A

prohibited.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

All portable electronic test equipment shall meet

grounding requirements of the _____________. This ensures the units are equipped with __________ cords and plugs.

A

National Electrical Safety Code, 3-wire AC

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

There are two kinds of solvent poisoning: _____________.

A

acute and chronic.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

_________ results from inhalation of an excessive concentration within a short time.

A

Acute poisoning

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

__________ results from repeated daily exposures for extended or prolonged
periods of time.

A

Chronic poisoning

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

______ personnel must be
aware of the dangers and damage that can result from improper disposal of hazardous
waste.

A

All

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

_________ shall be used for protection against solvent fires.

A

Inert gases

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

_______ fire extinguishers are most effective in putting out solvent fires.

A

Carbon dioxide (CO2)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

________ should be used for purging solvent gases from equipment or piping systems and in welding of solvent containers (hot work).

A

Nitrogen gas

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

The criteria for lighting minimums are found in the _________________.

A

Civil Engineering Manual, COMDTINST

M11000.11 (series).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Coast Guard policy regarding noise hazards and hearing conservation is contained in the _________________

A

Safety and Environmental Health Manual, COMDTINST M5100.47 (series).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

__________ respirator equipment will be used in extremely high
concentrations of toxic gases and vapors, i.e., for personnel entering into aircraft
fuel tanks.

A

Air line

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

Chemical __________ respirators shall be used in spray painting operations in hangars and paint shops.

A

cartridge

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

__________ airtight metal cans will be used for disposal of

oily waste.

A

Self-closing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

General Advanced

Composite Repair Processes Manual.

A

AFTO 1-1-690

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

The following safety precautions must be ________ observed while repairing or removing moisture from advanced composite structures.

A

strictly

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

Single-fiber
particles with a diameter of three to four microns and length less than _______ pose
the greatest threat to the respiratory system.

A

0.1 mm

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

Pregnant personnel shall _____ work with composites.

A

not

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

All units will reference the Coast Guard Hazardous Waste Management
Manual

A

COMDTINST M16478.1 (series)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

A qualified _________, adequately equipped with CO2, Halon, or dry chemical fire
extinguisher, shall be stationed near the aircraft during engine starting

A

fire guard

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

____________ materiels shall not be stored or allowed to accumulate in air or elevator
shafts, stairways, in out-of-the-way corners, near electric motors or machinery, against
steam pipes, or within 10 feet of any stove, furnace, or boiler.

A

Combustible

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

________ line fire extinguisher requirements shall be IAW Ground Servicing of Aircraft and
Static Grounding/Bonding.

A

Flight

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

All static grounds will have resistances of less than

__________.

A

10,000 ohms.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

All existing static grounds will be tested every _________ IAW MIL-HDBK-274(AS).

A

14 months

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
42
Q

Any static ground with a resistance greater than ____________ will
be removed or replaced.

A

10,000 ohms

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
43
Q

Spills involving an area of ___________ or less in any dimension (small priming spills)
are normally of minor consequence.

A

18 inches

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
44
Q

Spills not over __ feet in any dimension or not over ___ square feet in area and not
of a continuing nature shall have a fire guard posted, up wind, with a foam-type or
Halon-type fire extinguisher until the area is inert and purged.

A

10 , 50

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
45
Q

Spills over __ square feet or of a continuing nature shall be immediately reported to
the supervisor in charge, who shall notify the airport or local fire department to inert
the spill. Anyone in the spill area shall leave at once.

A

50

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
46
Q

Temporary improvised scaffolds or stands may be used if approved by the _________.

A

safety officer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
47
Q

On collet-equipped jacks, the collet shall be kept within ____ threads of all lift tube cylinders while lowering.

A

two

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
48
Q

Facility weight lifting devices (e.g., overhead hoist, cranes)
used at aviation units shall be tested IAW________________.

A

the Civil Engineering Manual, COMDTINSTM11000.11 (series).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
49
Q 
Aeronautical equipment (e.g., engine, blade, and prop slings/lifting
devices) shall be tested IAW \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_.
A

NAVAIR 17-1-114 (series).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
50
Q

ACMS special requirements (MSR) should be used to record periodic _____________.

A

inspections/testing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
51
Q

Do not deplete any O2 bottle below __ psi.

A

50

52
Q

Before any attempt is made to connect oxygen cylinders to oxygen systems, ensure
that each cylinder is correctly identified as containing aviation breathing oxygen, by
a _______________ or the words aviator’s breathing oxygen painted on the cylinder.

A

white band around the green cylinder

53
Q

_____ personnel shall be required to service the aircraft with gaseous oxygen.

A

two

54
Q

One person shall be stationed at the _________ of the servicing equipment and one
person shall be stationed where the pressure in the aircraft system can be observed.

A

control valves,

55
Q

O2 Servicing control valve shall not be opened more than ________ so it can be shut off
quickly in an emergency.

A

3/4-turn

56
Q

The ____________ shall designate engine run-up areas IAW airport procedures.

A

Commanding Officer

57
Q

When an aircraft is being taxied within _______ of obstructions, a minimum of one wing
walker for each wing tip shall be provided.

A

25 feet

58
Q

The _________ must always be in a position to see the wing walkers and the pilot’s eyes.

A

taxi signalman

59
Q

Aircraft must not be taxied at

anytime within ______ feet of obstructions.

A

five

60
Q

The grounding and bonding criteria specified in AFTO 00-25-172 apply only to _________. In addition to these minimum requirements, Coast Guard aircraft are to be grounded whenever
parked.

A

servicing of aircraft

61
Q

The Coast Guard is migrating technical publications chapter format from ATA-100 numbering system to the _______ international standard using Chapter
8.3.2, 1808-based SNS example

A

S1000D

62
Q

Normally, a TO is revised when the pages affected by existing
changes, in addition to pages requiring change, total ___ % or more of the technical
order.

A

50

63
Q

___________ borderline symbols indicate current changes in the text of a revision
which were not previously published as TO changes or supplements.

A

Black vertical

64
Q

The _____________ or a designated representative shall conduct a monthly review of each aircraft logbook as a QA check of
ACMS management procedures.

A

Engineering Officer

65
Q

Accumulation of flight hours on the CG-4377 Part III shall be recorded to the nearest
______ of an hour.

A

tenth

66
Q

As a minimum, units shall print a new MDL once a

_______ for each aircraft assigned to the unit.

A

month

67
Q

The new MDL should project all scheduled

maintenance for calendar and hourly tasks for a __ month operating period.

A

2

68
Q

_________ are

required to be maintained on all components listed on the aircraft configuration report.

A

SCHR’s

69
Q

________ Unserviceable (Reparable) Tag

A

DD 1577-2 (green)

70
Q

________ Unsatisfactory Report (UR) Tag

A

CG 1577-A

71
Q 
\_\_\_\_\_\_\_\_\_\_\_ Unserviceable (Reparable) Tag;  This form will be attached to an unserviceable item that is nonreparable at
ALC and will be sent to an outside vendor or manufacturer for repair.
A

DD 1577-2 (blue)

72
Q

A system of _______ indicates the performance

of Coast Guard Aeronautical Engineering as related to strategic plans and goals.

A

MOE’s

73
Q

The LCI team is comprised of members from
________________ who inspect the internal processes required to complete the
maintenance support function.

A

Commandant (CG-41) and ALC

74
Q

_______ provide a critical look at all aspects of engineering, logistics, and
maintenance management functions.

A

LCI’s

75
Q

Type 1 The aeronautical materiel under individual (serial number) management
by ALC is defined as _____________

A

(1) Aircraft engines
(2) High value components
(3) Items requiring special configuration control procedures
(4) Items in critical supply and of sufficiently high cost and low volume that require
individual management

76
Q

Type 2 Aeronautical materiel, less avionics, for which ALC has servicewide support
responsibility. To qualify as Type 2 materiel, one of the following conditions must be
satisfied:

A

(1) Unit price of $250 or more
(2) Procured from a commercial source of supply
(3) Flight critical
(4) Reparable

77
Q

Type 3 Consumable aeronautical materiel, less avionics, with a unit price less than
_____ and procurable from an OGA source. Units set their own allowance quantities
and procure materiel using unit AFC 30 funds.

A

$250

78
Q

Type 4 Avionics materiel for which ALC has service-wide support responsibility. To
qualify as Type 4 material, one of the following conditions must be satisfied:

A

(1) Unit price of $800 or more
(2) Procured from a commercial source of supply
(3) Flight critical
(4) Reparable

79
Q

Type 5 Consumable avionics materiel with a unit price less than _______ and procurable
from an OGA source. Units set their own allowance quantities and procure material
using unit AFC 30 funds.

A

$800

80
Q

Type 6 Aeronautical Support Equipment (SE):

A

(1) For items costing more than $250, but less than $2,500, ALC will provide initial
provisioning but will not provide subsequent replacement or repair.
(2) Contact ALC for guidance on repairables beyond unit capability and funding of
$2,500 or above.

81
Q

Type 7 Material

A

support the Turbomeca Arriel 2C2 CG engine.

82
Q

Hazardous materiel ______ be individually packaged and the container clearly marked as
to the hazardous contents.

A

shall

83
Q

Transportation of Freight manual

A

COMDTINST M4610.5

84
Q

There are three types of ferry flights:

A
  1. To and from Aviation Logistics Center (ALC)
  2. Unit to unit
  3. Tri-Swap: ALC to unit, unit to unit, unit to ALC
85
Q

There are three different types of aircraft transfers:

A
  1. Unscheduled Depot Level Maintenance (UDLM)
  2. Temporary Aircraft Transfer
  3. Permanent Aircraft Transfer
86
Q

______ is the only unit authorized to transfer, suspend, and unsuspend
aircraft in Asset Computerized Maintenance System
(ACMS).

A

ALC

87
Q

____ is the only unit authorized to transfer aircraft in

Asset Maintenance Management Information System (AMMIS).

A

ALC

88
Q

_____ will fund aircraft transfers in support of Depot Level

Maintenance

A

ALC

89
Q

Quality Assurance Inspectors shall be selected and designated in writing by the _____________.

A

Engineering Officer

90
Q

A ________ QA may sign off grounding discrepancies and flight control work in individual cases when
approved by a supervisor possessing maintenance release authority.

A

Collateral

91
Q

Most FOD can be attributed to three general causes:

A
  1. poor housekeeping,
  2. poor maintenance practices,
  3. carelessness
92
Q

_______ monitors the condition of enclosed mechanical systems through determination of wear metal concentrations in the lubricating fluid.

A

JOAP

93
Q

__________ (CG-41) will provide funds directly to DoD for USCG participation in the JOAP.

A

Commandant

94
Q

The primary directive for Coast Guard involvement in the JOAP will be _____________.

A

NAVAIR 17-15-50.1.

95
Q

To ensure that engines will not be susceptible to fuel starvation due to ice in the fuel system, the use of ______________ is mandatory.

A

Fuel System Icing Inhibitor

96
Q 
The normal level of fuel system icing inhibitor in
turbine fuel (FSII) is \_\_\_\_\_\_\_\_ percent by volume.
A

0.10-0.15

97
Q

____________ shall ensure that an effective calibration program is implemented for assigned equipment and tooling.

A

Commanding Officers

98
Q

______ shall manage the Coast Guard Aviation TEMPEST policy as directed by Commandant (CG-41).

A

ALC

99
Q

A ________ may be prepared when a directive or

situation dictates that specific work must be performed on a one-time basis.

A

SAMI

100
Q

A _______ is a local directive providing instructions for the performance of work which is
or may be of a continuing nature.

A

CAMI

101
Q

A ________ may be prepared when a

directive or situation requires that technical information be promulgated within an activity.

A

TIMI

102
Q

Technical Information Maintenance Instruction

A

TIMI

103
Q

Continuing Action Maintenance Instruction

A

CAMI

104
Q

Single Action Maintenance Instruction

A

SAMI

105
Q

___________ RESINS ARE NOT AUTHORIZED FOR USE ON ANY COAST GUARD AIRCRAFT.

A

POLYESTER

106
Q

No repairs shall be made to any primary structures without prior approval from ___________.

A

ALC Engineering

107
Q

NO REPAIRS SHALL BE MADE TO COMPOSITE STRUCTURES BY ANY UNIT UNLESS THEY MEET ALL SAFETY REQUIREMENTS LISTED IN ___________.

A

AFTO 1-1-690.

108
Q

Maintenance Instructions, Aircraft Fuel Cells and Tanks, _____________.

A

NAVAIR 01-1A-35

109
Q

Inspection and Repair of Aircraft Integral Tanks and Fuel Cells, __________.

A

AFTO 1-1-3

110
Q

The Technical Manual Application System (TMAPS), Deficiency Report CG-22 shall be used to request ___________________ changes.

A

Authorized Chemical Use List

111
Q

Lathes, milling machines, and similar types of equipment that produce cuttings or flying
particles should be set at ____ degree angles to each other, and secured to floors, bases, or stands.

A

15

112
Q

Nickel-cadmium battery shops will be mechanically ventilated to provide ____________ air changes per hour

A

three to four

113
Q

NEVER POUR WATER INTO THE ________, AS INTENSE HEAT IS GENERATED AND MAY RESULT IN BURNS.

A

ELECTROLYTE

114
Q

Oxygen cylinder storage shall be separate
from fuel-gas cylinders or combustible materiels (especially oil or grease) by at least a
distance of __ feet, or have a noncombustible barrier at least __ feet high and have a
fire-resistance rating of at least ___ hour.

A

20 , 5 , 1/2

115
Q

__________ shall be used to remove burrs, chips, and

metal cuttings from machines, work tables, stands, and floors.

A

Brushes

116
Q

Aviation Survival Shop shall maintain gaseous

oxygen servicing equipment IAW Chapter 5 of the ______________________.

A

Aviation Life Support Manual, COMDTINST M13520.1 (series), and ACMS MSR MPC 256141.0.

117
Q

All paint spray booths shall be equipped with __________________ to prevent accumulation of flammable and injurious vapors.

A

forced air ventilation

118
Q

The use of compressed air for blowing dirt from

hands, face, or clothing is __________.

A

prohibited

119
Q

Hangar and shop fire extinguishers shall

be either CO2 or dry chemical as recommended by the ___________________.

A

local fire marshal

120
Q

All extinguishers shall be inspected, serviced, and maintained IAW the manufacturer
instructions. ___________ inspections shall be made monthly and recorded on a tag attached to the extinguisher.

A

Visual

121
Q

Do not deplete an oxygen bottle below ____ psi.

A

50

122
Q

The radar antenna should
not be operated within _____ feet of any fueling, defueling, or similar operation unless a dummy load is installed that prevents the energizing of the antenna.

A

300

123
Q

Hot fueling operations are not allowed within ____ feet of an occupied building, unless operating under a waiver from Commandant (CG-41).

A

200

124
Q 
Each unit will conduct semiannual audits of tech pubs during the months of \_\_\_\_\_ and \_\_\_\_\_\_\_. A Mandatory
Special Requirements (MSR) card must be signed showing accomplishment of this task.
A

April , October.

125
Q

Technical Order Page Supplement,

A

(TOPS)

126
Q

A __________ is different from a standard change in that it supplements rather than replaces an individual page in a technical order.

A

TOPS (green page)

Process Guide Notes (1 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions