Suspension and steering service

Question 1

59. A tech unbolts the lateral acceleration sensor and turns it on its side while looking at a scan tool date display. Tech A says that the sensor should display 1 G when the sensor is turned on its side with ignition on. Tech B says that the sensor value should remain the same regardless of position. Which tech is correct?
    A. Tech A
    B. Tech B
    C. Both techs
    D. Neither tech

Answer 1

A

Question 2

60. A vibration at highway speed could be due to
    A. Excessive hub runout
    B. Broken stabilizer bar link
    C. Worn shocks
    D. Any of the above

Answer 2

A

Question 3

61. Two techs are discussing a vehicle that is equipped with electronically controlled shock absorbers. Tech A says that if the connector is unplugged, the shock is set to its most firm setting. Tech B says that the shock actuator usually uses compressed air to adjust the firmness of the shock. Which tech is correct?
    A. Tech A
    B. Tech B
    C. Both tech
    D. Neither tech

Answer 3

A

Question 4

62. A “loaded strut” is a strut that is _______
    A. An insert designed to fit into the original housing
    B. A strut that is gas-charged
    C. A strut assembly that includes the strut, spring, and upper bearing assembly in one unit
    D. A strut that is spring loaded

Answer 4

C