Subglacial Bedforms Flashcards
What are flutes?
They are small, elongated features that orient themselves in the direction of the ice.
They’re usually around 1m x 10m
Normally they have a proximal core and are made of till
They’re found in large groups clustered together
How do flutes form?
Rocks may reach the bottom of the glacier and begin to scrape along the earth.
Eventually, boulder-sized rocks become lodged in the ground. Once the boulder is in place, the glacier flows around it.
As a result, a cavity is formed on the down slope side of the boulder. This cavity is then filled with sediments such as till and outwash.
What do flutes consist mainly of?
Where are flutes formed?
Subglacial till
Cores of deformed, pre existing sediments
Downglacier where they commence at lodged boulders or clast clusters
By what two mechanisms do flutes form?
- pressure drops freezes -> adheres to basal ice > transported forward by ice -> new material added by deformation into cavity at upglacier end.
- Unfrozen sediment -> new sediment added downglacier end as cavity is transported forward by ice flow. (can freeze if contact pmp of ice)
What are the two types of flutes?
Why do you get this difference?
Tapering and parallel
Difference in till rheology or strain response to stress
What are tapering flutes?
Typical in Norway
Lower and narrower further down glacier.
Stiff, non-dilatant till
The basal ice contracts by ice deformation and a down lacier decay of flute forms.
What are parallel flutes?
Typical in Iceland
Constant cross profile for long distances.
Weak, dilating deformation till that deforms more readily than ice (dilitant = material is one in which viscosity increases with the rate of shear strain).
The pressure difference within basal ice grooves have equilibrium via till flow (not ice creep).
Groove closure is prevented and the flute propagates down glacier to the margin.
For flutes to form what must the glacier have?
Sufficient energy to deform the sediments.
This energy varies as the ice changes in thickness and velocity (and with the resistance of the sediments themselves also)
Changes in flow direction can be observed in flutes that have enough energy.
What are the three theories on flute formation?
Deformation theory- Boulton, 1976
Frozen-on theory -Gordon (1992)
Instability theory - Shaw and Freschauf (1971)
What is the Frozen-on theory -Gordon low-pressure (1992)?
The material is frozen on to the bed of the glacier and is moved on and deposited.
What is the Deformation theory Boulton, 1976?
Flutes form associated with a saturated deforming bed
Till flows into the low pressure area in the lee side of a subglacial clast
Some have clast at the stoss side and have a herringbone fabric pattern.
What is the Instability theory?
low-pressure property of the base of the glacier?
Series of obstacles within the till you get a series of flow cells moving sediment away from the troughs to the crest, marked by a herringbone type fabric
What are drumlins?
Drumlins are elongated features made of till that can reach a km or more in length.
One end is quite step, whilst the other end tapers away to ground level. The Stoss end is the steeper of the two ends and used to face into the ice flow.
They may or may not have a proximal core (uncommon)
What does being so big mean about drumlins?
They are often preserved.
3 different types of drumlin formation models
Deforming bed model
Instability model
Fluvial model