Study Signal Assess

Question 1

Who do you report a fault on a train to?

Answer 1

Maintenance Control and the Driver

Question 2

Name the components of the OLE

Answer 2

Catenary Wire
Dropper
Contact Wire
Head Span Wire
Cross Span Wire Neutral
Cross Span Wire Live
Insulators
Structure
Structure ID Plate
Along Track Conductor
Bond

Question 3

How do you stop a train in daylight?

Answer 3

Red Hand Signals
Red Flag

Question 4

When your train has stopped in an unplanned point when should you make an announcement?

Answer 4

2 minutes

Question 5

What are the 8 instances you should stop a train in an emergency?
(DAFT LOAF)

Answer 5

Damage to structures or earthworks above or below the line
Animals (Large) within the boundary
Fire
Track Defaults

Lights out on an emergency indicator
Obstructions
Animals (small) on or near the line
Floods

Question 6

Signalling sequence for a 4 Aspect signal?

Answer 6

Question 7

Signalling sequence for a 4 Aspect signal?

Answer 7

Question 8

Where do you find information about line speed, level crossings and direction of travel?

Answer 8

Sectional Appendix

Question 9

What four things must you know before going on or near the line?

Answer 9

Line Speed
Direction of Travel
Any areas of Prohibition
Any areas of Limited Clearance

Question 10

When can you enter a single line without a token?

Answer 10

Insert here

Question 11

What does the controlled intermediate block home plate look like?

Answer 11

Question 12

What does an automatic signal ID Plate look like

Answer 12

Question 13

What does a Distant signal ID plate look like?

Answer 13

Question 14

What does a ground positioning light signal look like?

Answer 14

Question 15

What do Limit of Shunt Light Signals look like?

Answer 15

Question 16

What do limit of shunt Indicators look like?

Answer 16

Question 17

What does a positioning signal look like with a main aspect?

Answer 17

Question 18

What is the first stop signal called that is controlled by the signaller?

Answer 18

Home Signal

Question 19

If your train stops and you’re not sure why, what would you do and when would you make your announcements?

Answer 19

Contact the driver or signaller and then make your announcements using the 2 4 6 8 pattern

Question 20

If your train stops and you’re not sure why, what would you do and when would you make your announcements?

Answer 20

Contact the driver or signaller and then make your announcements using the 2 4 6 8 pattern

Question 21

What does a signal with a white diamond attached to it mean?

Answer 21

Part of a track circuit

Question 22

What are the 5 instances you would lay track protection before the 1 1/4?

Answer 22

T Train Approaching
T Trailing Points
T Tunnels
T Telephone
S Signal Box

Question 23

After been switched on, how long will the GSM-R stay on for without been touched or used?

Answer 23

30 Minutes

Question 24

Where is the [ON/OFF] button on the GSM-R?

Answer 24

Insert Answer

Question 25

Where is the [ON/OFF] button on the GSM-R?

Answer 25

Insert Answer

Question 26

What does a four track layout look like?

Answer 26

Insert Picture Here

Question 27

How do you identify the COSS and what does this stand for?

Answer 27

Blue Armband with COSS written in white.

Meaning, CONTROLLER OF SITE SAFETY