Standards Flashcards
Which NACE standard is a brush blast?
NACE no. 4
What is ISO 8501?
International blasting standards
Which NACE standard is a commercial blast?
NACE no. 3
How much staining is allowed for NACE no. 3?
33%
How much random staining is allowed for NACE no. 2?
5%
In what order do the ISO standards for blasting go? From the cleanest to the least clean…
Sa 3
2 1/2
2
1
Are the ISO standardS and the NACE standards, for blasting, the same?
No
Which standard is for the pencil test
3363
Which standard is for barcol impresser
2583
Which standard is for pull off adhesion test using portable testers
4541
What standard is for determining DFT by destructive means
4138
Which standard is for MEK solvent rub
4752
Which standard is for measurement of DFT’s on concrete
PA 9
What is the standard for indicating moisture in concrete via the plastic sheet method
4263
What standard refers to the design, fabrication, and surface finish practices for any coating or lining
SP 0178
What is the standard for holiday detection
NACE SP0188
Which overall standard refers to waterjetting
NACE no. 5/SSPC SP 12
What is the standard for concrete surface prep
NACE no. 6/SSPC SP 13
What percentage of NACE standards relate to coatings
50%
When do standards become “binding” or “mandatory”?
When they are referenced in the specification
Which standard covers the measurement of MEK resistance
4752
What is the standard for the Adhesion test using tape
3359
Which standard is for the measurement of DFTs by distructive means
4138
How does SSPC PA2 define calibration standards
As defined by the specification
Which standard regards ultrasonic thickness gauges
6132
ASTM D 1731 is for what?
Preparation of hot-dip galvanized surfaces.