Standard Calls Flashcards
Altitude Selector Cross Check.
PF sets FL370
PF — “370 set”
PM — “Roger, 370”
Altimetry Cross Check (climbing)
At 10,000’
PF — “10,000 for ____”
PM — “Roger”
Transition Altitude During Climb
PF — “Standard”
PM — “Standard set and cross checked”
Altimetry Cross Check
1000’ from levelling
ie. FL360 to FL370
PF — “360 for 370”
PM — “Roger”
Engine Start Calls
PF
PM
PF — “Start Right”
PM STARTS ENGINE
PM — “Right Engine Normal”
FAF crossing
“VEPNA” (1800’) MA 3100’
PF - “VEPNA”, or “Final Approach Fix” if not named.
PM - Call passing altitude “1800” and call “Missed Approach 3100 SET”
PF - Confirms passing altitude no diff greater than 100’
1000’ on Approach
Auto call-out, or
PM — “1000, LANDING CHECKLIST COMPLETE”. Or unstable config. e.g. “FLAPS”
PF — In response to unstable config call. “FLAPS XX”, or “GEAR DOWN”, or “GO-AROUND, FLAPS ___”
500’ on Approach
Auto call out “500”, or
PM — “500”, and “STABLE”, or unstable parameter. E.g. “Airspeed”
PF — response to unstable parameter “CORRECTING”, or “GO-AROUND FLAPS___”
APPROACHING MINIMUMS
Verify auto call-out, or
PM — “APPROACHING MINIMUMS”
PF — “ROGER”
DA/MDA
Auto call-out, or
PM — “MINIMUMS”
PF — “CONTINUE”, or “GO-AROUND FLAPS___”
200 feet
PM — Monitor auto-call or calls: “200”, and “STABLE”, or “UNSTABLE”
PF — If unstable “GO-AROUND FLAPS___”
If DA coincides with 200’ the calls are?
PM — “MINIMUMS, STABLE”, or “MINIMUMS, UNSTABLE”
PF — “CONTINUE”, or “GO-AROUND FLAPS___”
At Glideslope Capture
Missed Approach Altitude set
Approx. 7NM to touchdown (or sooner)
PF — “GEAR DOWN, FLAPS 20, LANDING CHECKLIST”
PM — Completes all.
Capt arms Speedbrakes
