Standard Callouts

Question 0

Call and tolerance on V/S

Answer 0

“SINK RATE”

V/S >-1000ft/min

Question 1

Call and tolerance on air speed

Answer 1

“SPEED”

+10kts -5kts

Question 2

Call and tolerance on angle of bank

Answer 2

“BANK”

7 degrees

Question 3

Call and tolerance on attitude

Answer 3

“PITCH”
>+10
>-2.5

Question 4

Call and tolerance on ILS

Answer 4

“LOC”
1/2 dot LOC
“GLIDE”
1/2 dot G/S

Question 5

Call and tolerance on an RNAV

Answer 5

“CROSS TRACK”

X Track error exceeds 0.1nm

Question 6

Call and tolerance of vertical profile on NPA

Answer 6

“V/DEV”

When greater than 1/2 dot

Question 7

Call and tolerance on a NPA

Answer 7

“COURSE”
1/2 dot or 2.5 degrees for VOR
5 degrees ADF

Question 8

Calls and tolerances on RNP-AR Approach

Answer 8

"LAT-DEV"
L DEV Is half RNP or 1 dot
"VDEV" 
When vertical deviation 1/2 dot above or below
"SINK RATE"
V/S greater than -1,000ft/min
"BANK"
Bank angle greater than 30 degrees