Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Cirrus SR22T > SR22T Systems > Flashcards

SR22T Systems Flashcards

1
Q

What are the dimensions of an SR22T if you had to put it in a hangar?

A

38.3ft wide
26ft long
8.9ft tall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Tell me about the engine on the SR22T

A

Teledyne Continental

TSIO-550-K

315bhp at 2500rpm

Turbocharged, Direct Drive, Fuel Injected, Air Cooled, Horizontally Opposed 6 cylinder engine with 550 cubic inch displacement.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

How much fuel can the plane hold? What grades are okay?

A

94.5 gal, 92 usable

100LL (blue)
100 (gree)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What temperature Range are we looking for with CHT?

A

Green Arc

240 - 420 deg F

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What temperature Range are we looking for with EGT?

A

Green Arc

1000 - 1800 deg F

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What in.Hg range are we looking for with Manifold Pressure?

A

Green Arc

15.0” - 36.5’”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What range PSI are we looking for with Oil Pressure?

A

Green Arc

30 - 60psi

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Oil TEMPERATURE should never exceed:

A

240 deg F

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What oil temp/psi indicated the engine has been properly warmed?

A

100 deg F (38 deg C)

PSI does not exceed 70 when running up at 2500rpm

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What Range are we looking for with the Turbocharger Inlet Temperature? (TIT)

A

Green Arc

1000 - 1750 deg F

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What Volts range do we want with:

  • Essential BUS
  • Main BUS 1
  • Main BUS 2
A

24.5 - 32V

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

BATT 1 Current may be discharging up to __ and still be in Normal Range

A
  • 4 Volts
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Because of the aircraft’s turbocharged system, ___” Hg manifold pressure are maintained for ALL takeoffs

A

36.0” Hg

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What effect will utilizing the Alternate Static Air have on the instrument indications?!

A

They will read HIGHER than what is true

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Which electronic trim systems operate on 28 VDC, supplied through a 2-amp (unique) TRIM circuit breaker, on the ESS BUS 2?

A

The Elevator (Pitch) Trim, and the Aileron (Roll) Trim!

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Which electronic trim system(s) operate on 28V DC, supplied through a 2-amp (unique) TRIM circuit breaker, on the ESS BUS 2?

A

The Elevator (Pitch) Trim, and the Aileron (Roll) Trim!

17
Q

How do the flaps work in the SR22?

A

Powered by a 28V DC through 10-amp FLAPS circuit breaker on NON ESS BUSS

Electrically controlled through a motorized linear actuator that is mechanically connected to both flaps by a torque tube (:

18
Q

When will the key fob NOT actuate the door locks?

A

When BAT 1 switch is ON

19
Q

The ___ gage is used as the primary source to lean fuel mixture in the SR22

A

TIT (turbine inlet temperature)

  • a sensor in each turbocharger
20
Q

How are the majority of the Engine Indicating System displays received?

A

From a SENSOR that is mounted in the respective area, which MEASURES

21
Q

Starter/Ignition system components and characteristics

A
  • 28V DC supplied through 2-amp STARTER circuit breaker on NON-ESS BUS
  • 2 engine-driven mags
  • 2 spark plugs in each cylinder
  • OFF positions = starter electrically isolated
  • Turning BAT MASTER switch ON will allow mags to energize when ignition is turned to START
22
Q

What happens to Engine Exhaust after it leaves the cylinders in the SR22?

A
  • Exhaust gases flow through the Exhaust Collector to the turbocharger Turbine Inlet, providing turbine wheel rotation!
  • Then it exits through the turbine housing discharge port/tailpipes of lower cowling
23
Q

From the mixture control, fuel is routed to the _________ on the air-induction system throttle body.

A

fuel-metering valve

24
Q

The Engine Fuel Injection system does what?

A

Meters fuel flow in proportion to engine RPM, mixture setting, and throttle angle.

25
Q

Tell me about the Turbochargers in the SR22!

A

Twin turbos

  • Use exhaust gas flow to boost induction air pressure for increased power
  • Turbos compress and raise temp of incoming air BEFORE going to the intercoolers
  • There is 1 wastegate that controls the amount of exhaust gas is used by the turbochargers
26
Q

Tell me about the propeller on the SR22?

A
  • Composite, 3 blade, constant speed, governor regulated prop
  • Prop governor automatically adjust prop pitch to regulate RPM by sending engine oil to the governing pump, to/from a piston in the prop hub, and then centrifugal force and a spring twist the blades
27
Q

Increased Oil Pressure acting on the piston in the prop hub will twist the blades towards ____ pitch, ____ RPM.

A

High Pitch

Low RPM

28
Q

During climb and cruise, the governor automatically adjusts prop pitch to maintain a ____ RPM setting

A

2500

Cirrus SR22T (5 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions