Spinning

Question 1

________ is the process of rolling a blank over a mandrel.

Answer 1

Spinning

Question 2

A _______ is an unprocessed piece of sheet metal used in spinning.

Answer 2

Blank

Question 3

_______ creates circular axisymmetric shapes like bowls, pots and tanks.

Answer 3

Spinning

Question 4

Using a _____ ______ the blank is clamped against the end of the mandril.

Answer 4

Tail Stock

Question 5

The ____ tool or _______ tool is used to spin blanks.

Answer 5

Roller, Sissor

Question 6

The Two types of spinning are

Answer 6

Conventional and Shear

Question 7

_____ is the spinning type that thins the blank wall during processing.

Answer 7

Shear

Question 8

The _______ spinning method the final diameter is usually smaller than the original blank diameter.

Answer 8

Conventional

Question 9

Small products are not processed using spinning but instead are processed using ______ ______ or formed between dies.

Answer 9

Deep Drawing

Question 10

Spinning leaves _______ marks

Answer 10

Hoop

Question 11

____ is thick sheet metal and requires large forces to shape which include _____ forming.

Answer 11

Plate, Explosion

Question 12

Using water in Explosion forming has what 5 advantages.

Answer 12

Shockwaves, Deadens Sound, Cools, Suppresses Flash, Catches Debris

Question 13

______ ________ is used to shape thin walled tubing.

Answer 13

Explosive Bulging

Question 14

_________ uses fluid pressure to shape sheet metal

Answer 14

Hydroforming