Show Me, Tell Me Questions (for Driving) Flashcards
Open the bonnet, identify where you would check the engine oil level & tell me how you would check that the engine has sufficient oil.
Identify dipstick / oil level indicator, describe check of oil level against the min / max markers
Open bonnet, identify where you would check the engine coolant level & tell me how you would check the engine has the correct level.
Identify high / low markings on header tank where fitted or radiator filler cap & describe how to top up to correct level.
Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.
Identify reservoir and explains how to check level
Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe leave, of hydraulic brake fluid.
Identify reservoir, check level against high / low markings.
Tell me how you would check that the brake lights are working on this car.
Operate Break pedal, make use of reflections in windows, garage doors etc. or ask someone for help
Tell me how you would check that the brakes are working before starting a journey.
Brakes should not feel sponges / slack. They should be tested as you set off & vehicle should not pull to one side.
Tell me how you would check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.
No cuts and bulges (walls of tyres) 1.6mm of tread depth across the central 3/4 of the breadth of the tyre and around the entire outer circumference
Tell me where you would find the information for the recommended tyre pressure for this car and now tyre pressures should be checked.
Manufacturer’s guide, use a reliable pressure gauge, (like at a petrol station) check and adjust pressures when the tyres are cold, don’t forget spare tyre and replace valve caps.
Show me / explain how you would check that the power assisted steering is working before starting a journey.
If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just before moving off will give an immediate indication that the power assistance is functioning.
Tell me how you would check that the headlights and taillights are working. (No need to exit the vehicle).
Explain how you operate switch (turn on ignition if necessary) & how you would walk round vehicle to check working.
Show me how you would check that the direction indicators are working.
Applying the indicators or hazard warning switch and check functioning of all indicators. (Turn on ignition if necessary).
Show me how you would check that the horn is working (off road only).
Check is carried out by using control (turn on ignition if necessary).
Show me how you would check the parking brake for excessive wear.
Demonstrate by applying parking brake that when it is fully applied it secures itself and is not the end of the working travel.
Tell me how you would make sure your head restraint is correctly adjusted so it provides the best protection in event of a crash.
Head restraint should be adjusted so the rigid part of the restraint is at least as high as the top of your era or eye & as close to the head as is comfortable. NB some restraints do not move.
Show me how you would clean the windscreen using windscreen washers and wipers.
Operate control to wash and wipe windscreen (turn ignition on if necessary).
